|
[China]
Trade Verify
Address: No 12, Zhongjiang Village, Sanhekou Development Zone, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province, China
Contact name:Vicky
JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
Long Conveying Distance Dense Phase Dust Pneumatic Conveying System
1. Pneumatic conveying system are relatively economical to install and operate
2. Pneumatic conveying system are totally enclosed and if required can operate entirely without moving parts coming into contact with the conveyed material. Being enclosed there are hygiene & cleanlinesss benefits
3. A pneumatic conveying system can convey a product to any place with tubes. its flexible.
4. Pneumatic conveying system offer greatly reduced capital cost for long distance conveying.
5. PLC full automation
6. Pneumatic Conveying System are much better suitable to powder handling than mechanical conveyor because the conveyance channels used in pneumatic conveyors are completely enclosed.
7.Pneumatic conveyors can be designed to move products between floor levels and around difficult angles.
8. The whole system is composed of compressed air source, pneumatic vessel, control cabinet,conveying pipe and ash storage.
Product Application
1. It can transport almost all powder and particle materials.
2. It can be transported long distance.
3. It can be sent from one point to many points.
4. Can start in full tube state
Product Features
1.Strong power and big conveying quantity
Pneumatic Conveyor has been exported to different countries as
Russia, Saudi Arab, Iran, South Africa, Kenya, Ghana, Philippine,
Thailand, Malaysia, Indonesia, Vietnam, Mexico and so on.
2.Flexible application and grain hanging conveyor
3. Advanced technology and cost-saving
4. Safe and simple installation and commissioning.
5. Simple structure and less&easy maintenance.
6. High efficiency and energy-saving.
7. Easy operation.
Product Paremeter
| Model | DPCS-0.6 |
| Body Inner diameter(mm) | 800 |
| Total volume(M3) | 0.6 |
| Body material | Q235-B |
| Operation Temperature(oC) | <120 |
| Max. design pressure(Mpa) | 0.78 |
| Operation pressure(Mpa) | 0.2-0.5(Basis on the conveying distance) |
| Max. conveying distance(m) | <1000 |
| Outlet conveying diameter | DN80 |
| Air consumption(m3/min) | 3.5-7 |
Product Picture
Contact me
