|
[China]
Trade Verify
Address: No 12, Zhongjiang Village, Sanhekou Development Zone, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province, China
Contact name:Vicky
JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
Double Cone Vacuum Dryer With Buffer and Condensates
DCRD Series Double cone Rotating Vacuum Dryer is a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, belt connection and chain connection. Therefore, the dryer is stable in operation. The special design guarantees two shafts realize good concentricity. The heat medium and vacuum system all adapt reliable rotating connector with the technology from USA. On this basis, we also developed SZG-A. It can carry out steeples speed change and constant temperature control. As a specialized factory in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you.
Working Principle
1) When the heat source (hot water, low pressure steam, or thermal
oil) pass through the sealed jacket, the heat will be transmitted
to raw material through the inner shell;
2) Under action of driving power, the tank is rotated slowly and
the raw material is mixed continuously. The purpose of reinforced
drying can be realized;
3) The raw material is under vacuum condition. When steam pressure
is dropping, it makes the moisture (solvent) at the surface of raw
material become saturation and then evaporates. The solvent will be
discharged through vacuum pump.
4) The moisture (solvent) of raw material will infiltrate,
evaporate and discharge continuously.
5) The production processes are carried out continuously and the
drying can be done in a short time.
Product Application
DCRD double cone rotary vacuum dryer is applicable for drying and
mixing powdery and granular materials in the pharmaceutical, food,
chemical, dye and other industries. It is especially suitable for
the following materials:
1. Thermosensitive materials that cannot withstand high temperature
2. Easily oxidized and dangerous materials
3. Materials whose solvent should be recovered and materials of
poisonous gas
4. Materials required low residual volatile content
5. Materials with requirements on crystal shape
Technical Parameters
| Model | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 | 3500 | 4500 | 5000 |
| Volume inside of tank(L) | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 | 3500 | 4500 | 5000 |
| Max loading capacity(L) | 40 | 140 | 200 | 300 | 400 | 600 | 800 | 1400 | 1800 | 2000 |
| Max loading weight(kg) | 20 | 70 | 100 | 150 | 200 | 300 | 400 | 700 | 900 | 1000 |
| Revolution(rpm) | 3-13 | 6 | 5 | 4 | 4 | 4 | ||||
| Heating area(M2) | 1.1 | 2.3 | 2.8 | 3.9 | 5.1 | 6.5 | 8.2 | 12.2 | 16.5 | 18.2 |
| Motor power(kw) | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | 15 |
| Occupied area(mm) | 2160*800 | 2160*800 | 2350*800 | 2560*1000 | 2860*1300 | 3060*1300 | 3260*1400 | 3760*1800 | 3960*2000 | 4400*2500 |
| Rotating height(mm) | 1750 | 2100 | 2250 | 2490 | 2800 | 2940 | 2990 | 3490 | 4100 | 4200 |
| Design pressure of tank(Mpa) | -0.1~0.15 | |||||||||
| Desing pressure of jacket(Mpa) | <0.3 | |||||||||
| Weight(kg) | 800 | 1100 | 1200 | 1500 | 2800 | 3300 | 3600 | 6400 | 7500 | 8600 |
Schmatic of Installation
Product Show
electrical, steam, natural gas or other
