|
[China]
Trade Verify
Address: No 12, Zhongjiang Village, Sanhekou Development Zone, Zhenglu Town, Tianning District, Changzhou City, Jiangsu Province, China
Contact name:Vicky
JIANGSU GUOJIN DRYING TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
Continuous Disc Plate Dryer For Sand/Granulated/Powdered
CPD Series Continuous disc dryer is a high efficiency conducting and continuous drying equipment. Its unique structure and operating principle determine that it has advantages of high heat efficiency, low energy consumption, small occupied area, simple configuration, easy operation and control as well as good operating environment and etc. It can be widely used in drying process in the fields of chemical, pharmaceuticals, agricultural, foodstuff, feed, and other industries.
CPD Barium Carbonate Dryer Features
(1) Easy to adjust and control, good applicability.
- The drying efficiency can be improved by adjusting the thickness
of material layer, rotary speed of main shaft, quantity of harrow
arm, shape and size harrow plates.
- Each drying layer can input hot medium or cool medium
individually for heating or cooling. The temperature control is
accurate and easy to adjust.
- The residence time of materials can be adjusted accurately.
- Single material flowing direction to prevent material return and
mixing. The drying process is uniform and the quality stable, no
re-mixing is required.
(2) Easy to operate
- Simple operation for turn on and turn off.
- After material feeding is stopped, the remaining material inside
of the machine can be easily discharged out by the harrows.
- You can clean and observe inside from the large-scale viewing
window.
(3) Low energy consumption
- The material layer is thin and the rotary speed of main shaft is
low so it required low power and electricity consumption.
- The material is dried by conducting heat so it has high heating
efficiency.
(4) Good operation environment
- Normal pressure type:
The speed of air flow inside of the machine is low and the humidity
is high in upper end and low in bottom end so the dust can’t float
to the top which keeps no dust in the exhausted air.
- Closed type:
The machine is equipped with solvent recovery device which can
recover organic solvent easily from the wet air. The solvent
recovery device has a simple structure and high recovery rate. For
the flammable, explosive and poisonous materials, the nitrogen can
be used as medium for closed circulation and keeps a safe working
condition.
- Vacuum type:
The plate dryer is operating under vacuum condition and it is
particularly suitable for drying heat sensitive materials.
(5) Easy installation
- The dryer is delivered in a complete piece so it is quite easy to
install and fix at site.
- The disc plates are being arranged by layers and it will be
installed vertically so it takes a small occupying area from the
workshop.
CPD Barium Carbonate Dryer Technical Parameters
1. Drying Tray
- Designing pressure: generally 0.4Mpa, and the max. pressure is
1.6 MPa.
- Max. working pressure: generally ≤0.4Mpa, and the max. pressure
is 1.6 MPa.
- Heat source: steam, hot water, or thermal oil: Use hot water as
heat source when the drying plates' temperature is 100°C; Use
saturated water steam ≤0.4Mpa or steam-gas when the drying plates'
temperature is 100°C~150°C; Use thermal oil when the drying plates’
temperature is 150°C~320°C;
2. Material Transmission System
- Revolution of main shaft: 1~10 rpm, electromagnetism or
transducer timing.
- Rake arm: 2 to 8 rake arms will be fixed on the main shaft on the
every layer.
- Rake blade: the rake blades are hinged to the rake arms and float
with the surface of the plate. There’re several types of rake
blades.
- Roller: For the material that is easy to agglomerate, or required
to be grinded, the rollers shall be placed at the appropriate place
to reinforce the heat transfer and drying process.
3. Three types of dryer body: normal pressure, sealed, and vacuum
- Normal pressure: The dryer body is cylindrical or octagonal and
the structure can be integrated or separated. The ducting system
for the heat source can be placed inside or outside of the dryer.
- Sealed: The dryer body is cylindrical and it can bear the
interior pressure of 5KPa. The ducting system for the heat source
can be placed inside or outside of the dryer.
- Vacuum: The dryer body is cylindrical and the design pressure is
0.1MPa. The ducting system for the heat source is placed inside of
the dryer.
4. Air Heater
The air heater is usually used to meet larger evaporation capacity
requirements in order to increase drying efficiency.
CPD Barium Carbonate Dryer Technical Parameters
| Type | Diameter(mm) | Height(mm) | Area of dry(m2) | Power(kw) |
| 1200/4 | 1865 | 2877 | 3.3 | 1.1 |
| 1200/6 | 3297 | 4.9 | ||
| 1200/8 | 3717 | 6.6 | 1.5 | |
| 1200/10 | 4137 | 8.2 | ||
| 1200/12 | 4557 | 9.9 | 2.2 | |
| 1500/6 | 2166 | 3327 | 8.0 | |
| 1500/8 | 3747 | 10.7 | ||
| 1500/10 | 4167 | 13.4 | ||
| 1500/12 | 4587 | 16.1 | 3.0 | |
| 1500/14 | 5007 | 18.8 | ||
| 1500/16 | 5427 | 21.5 | ||
| 2200/6 | 2820 | 3781 | 18.5 | |
| 2200/8 | 4201 | 24.6 | ||
| 2200/10 | 4621 | 30.8 | 4.0 | |
| 2200/12 | 5041 | 36.9 | ||
| 2200/14 | 5461 | 43.1 | 5.5 | |
| 2200/16 | 5881 | 49.3 | ||
| 2200/18 | 6301 | 55.4 | 7.5 | |
| 2200/20 | 6721 | 61.6 | ||
| 2200/22 | 7141 | 67.7 | 11 | |
| 2200/24 | 7561 | 73.9 | ||
| 2200/26 | 7981 | 80.0 | ||
| 2500/6 | 3115 | 3981 | 26.3 | 4 |
| 2500/8 | 4401 | 35 | ||
| 2500/10 | 4821 | 43.8 | 5.5 | |
| 2500/12 | 5241 | 52.5 | ||
| 2500/14 | 5661 | 61.3 | 7.5 | |
| 2500/16 | 6081 | 70.0 | ||
| 2500/18 | 6501 | 78.8 | 11 | |
| 2500/20 | 6921 | 87.5 | ||
| 2500/22 | 7341 | 96.3 | ||
| 2500/24 | 7761 | 105 | 15 | |
| 2500/26 | 8181 | 113.8 | ||
| 3000/8 | 3768 | 5143 | 48 | 11 |
| 3000/10 | 5643 | 60 | ||
| 3000/12 | 6143 | 72 | ||
| 3000/14 | 6643 | 84 | ||
| 3000/16 | 7143 | 96 | ||
| 3000/18 | 7643 | 108 | 15 | |
| 3000/20 | 8293 | 120 | ||
| 3000/22 | 8793 | 132 | 18.5 | |
| 3000/24 | 9293 | 144 | ||
| 3000/26 | 9793 | 156 | ||
| 3000/28 | 10293 | 158 |
CPD Barium Carbonate Dryer Show
