Changzhou Yibu Drying Equipment Co., Ltd |
Verified Suppliers
|
|
Drier Description
The operation principle of animal feed rotating drum drying machine
is to let that the liquid or slurry-likematerials form thin film on
the surface of roller which is heated bysteam or other thermal
carrier. the film will be completely dried and the product will be
removed by scraper. The exposed surface of the roller will contact
the materials again to form film and carry out the drying.
Application
HG series rotating drum drying machine is widely used for the
drying, tablet making and other operation procedures of the sticky
and paste state materials. The machine has been used in the food,
chemical, medicine and other industries with good performances.
Features
1). Taking the steam or oil as the heat source. The heated area is
big. The heat efficiency is high. Heating is uniform.
2). The drying speed and rate is big. The heat transmission for the
wet materials on the roller wall is from the inside to the outside
and uniform. The temperature gradient is big so as to make that the
film surface keeps the stronger evaporation strength.
3).The drying time is short, about 10 - 15s. The machine is
suitable for those heat sensitive materials.
4). The operation is simple. And maintenance is easy.
5). High heat efficiency, thermal deficiency reach 80-90%
1.High heat efficiency. The principle of heat transfer of the
cylinder dryer is heat conduction and the conducting direction
keeps identical in the whole operation circle. Except heat
loss of end cover and radiation loss, all heat can be used for
evaporation of
wet materials on the wall of the cylinder. The efficiency can
reach 70-80%.
2.Large operation elasticity and wide application.Various drying
factors of the dryer can be adjusted,such as concentration of
feeding liquid, thickness ofmaterial film, temperature of heating
medium, rotating speed of the drum etc. Which can change
drying speed of the under dryer. As these factors have
no interrelations each other, it brings great
convenience to dry operation, and makes it applicable to dry
various materials and to meet different requirements
of production.
3.Short drying period. The drying period of materials is
normally 10 to 300 seconds, so it is suitable for heat
sensitive materials. It also can be run under the reduced
pressure if it is put in vacuum vessel.
4.Fast drying rate. As film of materials coated on the wall of
the cylinder is very thin.Normal, thickness is 0.3 to 1.5 mm,
plus directions of heat and mass transmitting are identical,
the evaporation strength on the surface of the film can be
20-70 kg.H2O/m2.h.
Technical data
Type/Spec | size diameter*length (mm) | effective heating area(m2) | drying capacity (kg/h) | steam consumption (kg/h) | power of motor (kw) | overall size L*W*H (mm) | weight (kg) |
HG-600 | Φ600Χ800 | 1.12 | 40-70 | 100-175 | 2.2 | 1700*800*1500 | 850 |
HG-700 | Φ700Χ1000 | 1.65 | 60-90 | 150-225 | 3 | 2100*1000*1800 | 1210 |
HG-800 | Φ800Χ1200 | 2.26 | 90-130 | 225-325 | 4 | 2500*1100*1980 | 1700 |
HG-1000 | Φ1000Χ1400 | 3.3 | 130-190 | 325-475 | 5.5 | 2700*1300*2250 | 2100 |
HG-1200 | Φ1200Χ1500 | 4.24 | 160-250 | 400-625 | 7.5 | 2800*1500*2450 | 2650 |
HG-1400 | Φ1400Χ1600 | 5.28 | 210-310 | 525-775 | 11 | 3150*1700*2800 | 3220 |
HG-1600 | Φ1600Χ1800 | 6.79 | 270-400 | 675-1000 | 11 | 3350*1900*3150 | 4350 |
HG-1800 | Φ1800Χ2000 | 8.48 | 330-500 | 825-1250 | 15 | 3600*2050*3500 | 5100 |
HG-1800A | Φ1800Χ2500 | 10.6 | 420-630 | 1050-1575 | 18.5 | 4100*2050*3500 | 6150 |