|
[China]
Trade Verify
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Contact name:Charlie Zha
Changzhou Yibu Drying Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Principle
The materials are uniformly distributed on the mesh-belt by the material feeder. The mesh-belt generally adopts 12-60 mesh stainless steel mesh and it is drawn by a transmission device and move inside the dryer. The dryer is composed of several sections. For each section the hot air is circulated separately. Part of exhausted gas is exhausted by a special moisture exhaust blower. The waste gas is controlled by an adjustment valve. The hot air passes through the mesh-belt covered with bring water material away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the drying process will fall into the material collector continuously. The top and low circulation units can be freely equipped according to client requirement;
| Model | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 |
| Unit number | 4 | 5 | 4 | 5 | 4 | 5 |
| Belt width | 1.2 m | 1.2m | 1.6m | 1.6m | 2m | 2m |
| Drying section length | 8mm | 10mm | 8mm | 10mm | 8mm | 10mm |
| Thickness of the material to be covered | 10-80mm | 10-80mm | 10-80mm | 10-80mm | 10-80mm | 10-80mm |
| Temperature | 60-130°C | 60-130°C | 60-130°C | 60-130°C | 60-130°C | 60-130°C |
| Steam pressure | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa |
| Steam consumption | 120-300kg/h | 150-375kg/h | 150-375kg/h | 170-740kg/h | 180-500kg/h | 225-600kg/h |
| Drying time | 0.2-1.2h | 0.25-1.5h | 0.2-1.2h | 0.25-1.5h | 0.2-1.2h | 0.25-1.5h |
| Drying strength | 60-160 kg H2O/h | 80-220 kg H2O/h | 75-220 kg H2O/h | 95-250 kg H2O/h | 100-260 kg H2O/h | 120-300 kg H2O/h |
| Total power of the blower | 9.9kw | 12.1kw | 9.9kw | 12.1kw | 18.2kw | 22.2kw |
| Total power of the equipment | 11.4kw | 13.6kw | 11.4kw | 13.6kw | 19.7kw | 23.7kw |
Application :
De-watering vegetable, particle feed, gourmet powder, shredded coconut stuffing, organic color, compound rubber, medicine product, medicine material, small wooden product, plastic product, aging and solidification for the electronic component and device..
The materials are uniformly distributed on the mesh-belt by the material feeder. The mesh-belt generally adopts 12-60 mesh stainless steel mesh and it is drawn by a transmission device and move inside the dryer. The dryer is composed of several sections. For each section the hot air is circulated separately. Part of exhausted gas is exhausted by a special moisture exhaust blower. The waste gas is controlled by an adjustment valve. The hot air passes through the mesh-belt covered with bring water material away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the drying process will fall into the material collector continuously. The top and low circulation units can be freely equipped according to client requirement;
