|
[China]
Trade Verify
Address: NingheRoad 18th, Zhenglu Town ,Tianning district , Changzhou, Jiangsu, China (Mainland)
Contact name:Charlie Zha
Changzhou Yibu Drying Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
WFJ-30/60/80/110 Series Micro food grinding machine
Main Application:
WFJ-30/60/80/110 Series Micronizer consists of main motor,auxiliary motor and electrical control cabinet.It has the features of compact design ,simple structure,winnowing, and non-sieve or mesh.The negative pressure brings heat and particles out,so it is especially well applied in the industry of chemical,food stuff,pharmaceutics,cosmetics,fuel,resin and etc.Its performance is up to the international advanced level.
Operating Principle:
The material is sent to grinding chamber through hopper and screw conveyer, and then pulverized by high speed rotary blades.Processed fine material are winnowed and collected by the negative pressure of an air intake of a blower,dust collector is included.The advantage of it are very little dust,high utilization of the raw material and cost reduction.
Nowadays, YIBU company have customers both in China and abroad.Foreign customers such as Russian,East Europe,Middle East,South America,North America,East Asia,Southeast Asia, Africa,etc.
Machine discription:
| Model | 30 | 60 | 80 | 110 |
| Prodtction Capacity(kg/h) | 30-800 | 50-1200 | 100-1200 | 200-3000 |
| Size of input granules(mm) | ~10 | ~10 | ~15 | ~20 |
| Size of output granules(mesh) | 60-450(adjustable) | 60-450(adjustable) | 60-450(adjustable) | 60-450(adjustable) |
| Total Power(KW) | 46 | 84.15 | 145 | 230 |
| Main running speed | 3800 | 2800 | 2200 | 1480 |
| Weight(kg) | 2800 | 4500 | 9500 | 16000 |
| Overall Size(L×W×H) | 6640×1300×3960 | 7500×2300×4530 | 9800×2600×6800 | 13000×3500×7200 |
the machine are made by the matericals Stainless Steel and according with GMP standards
◆ The material enters the grinding chamber via the screw feeder and
then sheared and broken by the fast-rotating knives .The power
passes the guide ring and enters the classification chamber. As the
classification wheel is in revolution, both the air force and
centrifugal force act on the powder.
◆ As the particles whose diameters are greater than the critical
diameter (diameter of the classification particles) have a great
mass, they are thrown back into the grinding chamber to be ground
again, while the particles whose diameters are smaller than the
critical diameter enter the cyclone separator and bag filter via
the material exit pipe be means of negative pressure wind conveying
.The discharge material meets the requirement for the product.
1 In the machine chamber, there is the leaf structure. When
operation, the air in the grinding chamber is blown out by the
rotary leaves taking out the heat. Therefore, there is not much
heat in the chamber to ensure the characteristic of the material.
2 When operation, the strong air flow can expel the material out.
So it can pulverize the heat sensitive and sticky material with
good effect.
3. For the good performance on the heat, it can be the substitute
of universal crusher.
4. Expect the pull force of the fan, the air flow in the grinding
chamber blows the fine powder out (the fineness of the powder is
adjustable through the sieves). Thus, it can increase the capacity
of the machine.
