Home Companies GUANGDONG HWASHI TECHNOLOGY INC.

Spiral Wire Looping Automatic Welding Machine For Industrial Fan Guard Mesh

Contact Us

[China]

Trade Verify

Address: Room 501, Xuyuan Building, No. 5003 Longgang Road, Shenzhen, Guangdong, China 518000

Contact name:Kary Hou

GUANGDONG HWASHI TECHNOLOGY INC.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Spiral Wire Looping Automatic Welding Machine For Industrial Fan Guard Mesh

Country/Region china
City & Province shenzhen guangdong
Categories Pharmaceutical Machinery

Product Details

Automatic Spiral Wire Looping , Wire Spiral Fan Guard / Fan Mesh / Fan Grill Welding Machine
 

This machine is special for automatic coil winding, welding and rotating of spiral fan guard. It is designed as medium frequency welding power system. The machine is equipped with 5 sets of welding heads, automatic rotating system, and automatic wire feeding and winding system. Operator only needs to put the wire into horizontal fixture, the coil winding system will operate automatically. Then the welding electrode will be operated separately to weld the spiral wire fan guard.
This machine can achieve automatic rotation, mobile, and welding so as to increase product quality and efficiency and lower the production cost. It helps to solve the defects of unstable quality and low efficiency. Higher production rate and automation degree.
Welding product requirement: ( We can customize the machine according to your requirement)
Outer ring &reinforcement wire diameter: 5mm
Central ring wire diameter: 5mm
Spiral wire diameter: 2mm
Max diameter of product: 1020mm

 

Main design :

 

Main Body: The main body is made of reinforced good quality steel plate. According to the product, it is designed as three groups of up and down electrode, and two groups of left and right electrode. Only need to adjust the electrode moving distance can meet the requirement of welding different diameter of product. Reasonable vertical structure. Ensure the main body has enough rigidity and stability to support the machine when conducting high speed welding. The machine is equipped with slideway. The main body could offer stress supporting point and working platform for other actions.


Power Supply System: Adopt one set of medium frequency inverter 100KVA special resistance welding transformer as the welding power source. Duty cycle rate is 50%. The three-phase power supply, through rectified by a special inverter, is converted into 1000Hz AC voltage and then is transmitted to a medium frequency transformer. The current is rectified in order to supply DC welding current. This power source is different from the general type ac pulse power source because it can adjust rapidly and precisely. Small impact to the power grid and the requirement to the power grid capacity is much lower than the single-phase welder with the capacity.
Advantage: three-phase input; small impact to the power grid; medium frequency DC output; no impedance loss to the circuit; high thermal utilization factor; the precision setting of welding time is high which can reach 1/1000sec; large instantaneous current; prevent deformation and color change on the product.


Welding Control System: Adopt the self-developed HSMF1-400 intelligent microcomputer quick response touch controller, all-digital control, simple and clear operational interface. Automatic testing and compensation which could guarantee the situation that the machine will be at work only when the current value is in the preset data so as to ensure the stability of welding effect and effective prevention of undesirable phenomena like loose welding and cold joint. The features of quick response and high precision of control may help you obtain high quality of welding spots.
Pressurized Mechanism: Adopt cylinder as the pressurized source which is control by good quality of imported electromagnetic valve and coordinated with precision-machined linear slide to pressure the electrode tip. The pressure of each welding head could be adjusted independently to ensure the stability of welding machine. Adopt the working manner that the bottom bears the stress from the top to guarantee the good contact, unimpeded, constant resistance value of secondary circuit and stable transmission of output current of welding transformer. Guarantee to obtain high efficient and good quality of welding spots.


Main Engine Control System: Adopt the touch screen of Japan Panasonic as the human-machine interface, English input. The PLC, as the control hub as the whole machine, is in charge of reading, transmitting and controlling all kinds of signal processing and coordinating with various external instructing transmission signal mechanism in order to ensure the validity of all orders of execution of the machine. The self-detection of all automatic testing stations effectively eradicates the occurrence of malfunction and other accidents. When the pressure, current, air pressure, hydraulic pressure, temperature or other testing signals are in abnormal situation, the machine will give an alarm to prevent any insecure accidents.


Automatic Coil Winding System: Design as X, Y, L three axle linkage mode. Conduct automatic equidistance moving, automatic rotating, automatic pressing and stepping to track mould with sliding block.


Automatic Rotating System: Servo motor and 600mm rotary table consist of rotation system. Easy adjustment, quick response and high control precision. It can achieve cycle working.
 
Technical Specifications:
 

No.ItemWL-SQ-AC 200K
1Input Power200KVA
2Input Voltage380V Single-Phase
3Input Current400A
4Duty Cycle Rate25%
5Max Short Circuit Current38000A
6Welding Models16 types
7Max Secondary No Load VoltageAC 11.6V
8Continuous Working Current20KA
9Welding Transformer Insulation GradeF
10Pressing Curve2 types
11Welding Electrode4+2
12Max Welding Electroder Width150mm
13Automatic Coil Winding Rotating Speed300-500mm/sec
14Welding Electrode Stroke80mm

 
 
 
 
         
 
 
 

   
 
 
 

                 
 
 

 

 

 

Hot Products

Manufacturer of Automatic Robotic System CNC 6-Axis Industrial MIG tig welding Robot for Steels My ...
6 AXIS TIG / MIG Welder Industrial Welding Robots My Whatsapp: +86 186 8038 9568 Technical ...
HWASHI Robotic arm Arc Industrial 6 Axis tig Welding Robot My Whatsapp: +86 186 8038 9568 Technical ...
HWASHI Robotic MIG Arc Welding 6 Axis Industrial Welding Robot My Whatsapp: +86 186 8038 9568 ...
HWASHI Industrial Stainless Steel 6 Axis Robotic Welding Machine My Whatsapp: +86 186 8038 9568 ...
HWASHI Robotic MIG Arc Welding 6 Axis Industrial tig Welding Robot My Whatsapp: +86 186 8038 9568 ...