|
[China]
Trade Verify
Address: No.210,211,212,213,214,Building 1,No.12 Industry Western Road,SongShanHu,Dongguan,Guangdong,China.523808
Contact name:Carina
Med Accessories Technology Dongguan Co., Ltd. |
|
Verified Suppliers
|
|
|
| Manufacturer | Model |
|---|---|
| Siemens | Sirecust 630, Sirecust 700, Sirem SpO2 Modul |
| Connector Distal | 10-pin |
| Connector Proximal | Adult Clip/adult soft |
| Packaging Type | Bag |
| Packaging Unit | 1 |
Our products advantage:
1.Our chip Signal accurate and stable Ensure product quality
2. Patient side: medical silicone material
Comfortable medical silicone pad, good shading effect and no
leakage
Safe, non-toxic, soft and comfortable
3. Wire: Made of medical-grade TPU material, the wire is soft and tensile and easy to handle.
4. Double shielded cable: Multi-layer wire shielding, strong
anti-interference ability
Stable signal transmission, threaded, tensile and bending resistant
5. Equipped with high-quality connectors
The stand connector is accurately positioned and difficult to remove from the monitor
6. Quality: 1 year warranty and tested by monitor and simulator
Specifications
Basic Unit Specifications:
- Rating: 3.75V+/-10%
- Safety category: BF type
- Waterproof category: IPX2
- Service life: 1 year
- Shelf-life: 3 years
Warning
1.Sensors are designed for use with specific monitors.
2.The operator is responsible for checking the compatibility of the monitor, probe and cable before use ncompatible components can result in degraded accuracy and performance.
3.Do not assess the sensor’s accuracy by using a functional tester or oximetry simulator.
4.Consult the operation instructions for the equipment concerned and the related accessories before operating equipment to ensure their compatibility.
5.Portable and mobile RF communications equipment can be affect equipment.
6.Disposal of the sensor shall comply with local reg
Cleaning the equipment
1.Clean the sensor and its connecting cable with warm soapy water.
2.The probe and the cable must be cleaned using a soft cloth moistened with soapy water or 70% isopropyl alcohol. Carefully avoid damaging the surface of the visual indicator and the detector. Allow the probe and the cable to dry thoroughly before use. Do not use any abrasive agents or chemical product except 70% isopropyl alcohol
3.Do not irradiate, autoclave, soak or immerse the probe in any kind of solution. Keep the probe clean and dry.
4.The average life expectancy of a SpO2 sensor is more then a year under the conditions of use advocated in these operating instructions.
