Impeller Centrifugal Pump Set With Jockey Pump UL Listed FM Approved Fire Pump Eaton controller

UL/FM End Suction Pump , Diesel Engine Fire Pump 250gpm@110psi

 Fire Pumps are used to supply water for automatic sprinkler
systems, standpipes or fire hydrants. NFPA No. 20 classifies fire
pumps as split case, vertical turbine, end suction, or In-Line
design. In-Line fire pumps have capacities of 50, 75, 100, 150,
200, 250, 300,400, 450, 500, and 750 GPM; End Suction pumps are
rated for 100, 200, 250, 300, 400,450, 500, and 750 GPM; Split case
and vertical turbine fire pumps are rated 150, 200, 300, 450, 500,
750, 1000, 1250, 1500, 2000,3000, 3500, 4000, 4500, and 5000
GPM.All fire pumps are rated at 40 pounds per square inch or more
of boost.  Fire Pumps of the type described shall meet the
following basic requirements:   1.Each pump is to be tested
hydrostatically  for not less than 5 minutes. The test pressure is
to be not less than 1.5 times the maximum working pressure of the
pump, but in no case less than 250 psi (1724 kPa).  2.A pump shall
develop not less than 65 percent of rated total head when
discharging at 1.5 times rated capacity.The maximum net pressure
for a fire pump shall not exceed 140 percent of rated head.  3.The
maximum pump brake horsepower shall not exceed the HP rating its
driver, including service factor.  

• Product Details

• CERTIFICATE

​