|
[China]
Trade Verify
Address: Rm. E, 16th FL., Century Bldg. No. 206, Jianghan Rd., Hankou, Wuhan, China
Contact name:Kathy Wong
Wuhan Spico Machinery & Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
FM Approved IF05ATH-F Fire Pump Diesel Engine 74KW Power De Maas
One of De Maas's specialities is the development and manufacturing of dedicated engines for sprinkler systems.The in house capabilities give us the possibility to develop a carefully selected base engine into a high quality,high performance firefighting engine.Experience over years have given us the knowledge to do that in line with the highest demanding standards required by the market.
De Maas Firefighting Engines:
| General Engine Data | IF05ATH-F | ||||||
| Type | 4 cycle, 4 Cylinder In Line, Water cooled | ||||||
| Aspiration | Turbo charged | ||||||
| Cylinder Type | Replaceable | ||||||
| Bore x Stroke(mm) | 104 x 132 | ||||||
| Displacement(litre) | 4.483 | ||||||
| Compression Ratio | 17.5 : 1 | ||||||
| Valves per Cylinder | - Intake | 1 | |||||
| - Exhaust | 1 | ||||||
| Valve Timing | - Intake | Opening: 15⁰ BTDC - Close: 35⁰ ABDC | |||||
| - Exhaust | Opening: 69⁰ BBDC - Close: ATDC | ||||||
| Valves lashes at cold | - Intake | mm | 0.25 ±0.5 | ||||
| - Exhaust | mm | 0.5 ±0.5 | |||||
| Combustion Type | Direct Injection | ||||||
| Firing Order | 1 – 3 – 4 – 2 | ||||||
| Rotation | Counter Clockwise, viewed from flywheel | ||||||
| Dimension L x W x H (L=Construction Length) | ± mm | 955 x 955 x 1,497 | |||||
| Engine Rating | 1,760 | 2,100 | 2,200 | 2,350 | 2,600 | 2,800 | 2,940 | ||||||||||||||||||||||||||||||||
| IF05ATH-F | kW | 74 | 86 | 90 | 95 | 97 | 97 | 98 | |||||||||||||||||||||||||||||||
| Fuel System | |||||||||||||||
| Injection Pump | StanaDyne Rotary Pump type | ||||||||||||||
| Governor | Fixed speed control | ||||||||||||||
| Fuel Lift Pump | Exclusive (Electric version as an Option) | ||||||||||||||
| Fuel Filter | Full flow, cartridge type | ||||||||||||||
| Used Fuel | Diesel fuel according EN 590 | ||||||||||||||
| Fuel consumption at Full Load Approx. | at 2,940 rpm | 266 | 228 | 220 | 247 | ||||||||||
| Fuel consumption information at other Revs. | See table no. | 03.400.06FCEN03 | |||||||||||||
| Standard Supply line Size | mm | 10 | |||||||||||||
| Standard Return line Size | mm | 10 | |||||||||||||
| Electrical System | 24 Volts (Nominal) | |||||||||||
| Starter motor | kW | 3 | ||||||||||
| Battery Min. capacity recommended | Ah | 180 (12 Volts) | ||||||||||
| Quantity per battery bank | 2 | |||||||||||
| Battery Cold Cranking Amperes | @ -18⁰C | 950 | ||||||||||
| Charging Alternator Output | Amp. | 90 | ||||||||||
| Engine stop device build in fuel pump | Energized to Stop | |||||||||||
Advantage:
First-Class international technical standards
NM Fire is the only enterprise in China that obtained not only UL and FM certificates, but CCCF as well,also the first company in the world who was authorized by UL CCIC as witness testing center for both fire pumps and fire fighting engines.
NM fire obtained fire diesel engine UL1247 and fire pump UL448 witnessed laboratory accreditation,fully proved that the company in terms of hardware and software strength,are to meet the
strict requirements of UL certification.
Service:
| Pre-service |
| Introduce the product to the customer in detail,answer the question raised by customer carefully; |
| Sale service |
| 1.Ensure product with high quality and pre-commissioning before delivery; |
| 2.Delivery on time; |
| After-sale service |
| Provide considerate services to minimize clients’ worries. |
