Q8 HIGH PERFORMANCE COPPER WIRE CLAMP-ON AC CURRENT SENSOR
The model Q8 copper wire clamp-on ac current sensor is suitable for
5A, 10A cable online measurement, the user friendly shape make It
easily clamp onto cables.
FEATURES
- Suitable for 5A, 10A cable online measurement.
- Holding wire diameter: φ8mm
- Dimension: 42.6mm × 122.5mm × 23mm
- Load capacity: ≤4Ω
- Installation: clamp type
- Output mode: lead output
PARAMETERS
Electrical parameters |
---|
Ratio | 1000: 1 or 2000:1 (customized) |
Accuracy class | 0.2%, 0.5% |
Primary current | 0 - 10A AC |
Secondary current | 0 - 10mA AC (customized) |
Max. Cont. Input current | 12 A |
Load capacity | ≤4Ω |
Over voltage category | CAT III 600V |
Output signal | 10mA AC at nominal input current |
Frequency range | 40Hz-2000Hz |
Dielectric strength | 3KV 50Hz/60Hz at 1minute |
Temperature range | -20°C to +55°C |
Output | 2.5 meter cable with D01 connector |
Max. voltage not insulated conductors | 600 V |
Standard | EN 61010-1, EN 61010-2-032 |
Installation | clamp type |
Output mode | lead output(2.5m) |
Mechanical parameters |
---|
Dimensions (L x W x H) (mm) | 42.6× 122.5 × 23 |
Weight (g) | 225 |
Holding wire diameter (mm) | φ8 |
Max. jaw opening (mm) | 8 |