Active Member
|
[China]
Address: Tang'aoyu Industry Zone,Xiangyang Town,Yueqing City,Zhejiang ,China
Contact name:Janet
Zhejiang Lisheng spring co.,ltd |
|
|
Internal Metric Rectangle Section Wire Snap Rings For Automotive
Wire snap rings are most commonly used for shafts, bores and bearing retention. If your application requires strong centrifugal forces or extreme rotational speeds, check out our circlip selection.
Produced by edgewinding, with no custom tooling charges, snap rings have been specified for many years in the automotive and heavy equipment industries as a standard choice of engineers.
We offers eight series of snap rings from stock:
Over 1,000 stock sizes
Inch and Metric series rings available
Stocked from .375” to 10” diameters, 13 mm to 300 mm
Customs available from .157” to 120”
| PART NUMBER | SHAFT | RING | GROOVE | Tc * | Tg* | APPLI- CATOR | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Diameter S | Thickness | Diameter | Width | |||||||||||
| Frac. inches | Dec. inches | Tol. inches | t inches | Tol. inches | C | C1 | G inches | Tol. inches | W inches | Tol. inches | ||||
| 1200-7 | 1/8 | 0.125 | .032dia | 0.31 | 0.34 | 0.08 | +0.005 | 0.036 | 338 | 70 | 40 | |||
| 1200-11 | 5/32 | 0.156 | .032sq | 0.36 | 0.39 | 0.12 | -0.000 | 0.036 | 434 | 63 | 41 | |||
| 1200-13 | 3/16 | 0.188 | .036dia | 0.45 | 0.49 | 0.13 | 0.040 | 603 | 139 | 42 | ||||
| 1200-14 | 3/16 | 0.188 | .032sq | 0.40 | 0.44 | 0.14 | 0.036 | 532 | 84 | 43 | ||||
| 1200-15 | 7/32 | 0.219 | +0.005 | .048sq | 0.51 | 0.55 | 0.15 | 0.052 | 962 | 190 | 44 | |||
| 1200-15R | 7/32 | 0.219 | -0.015 | .048dia | 0.51 | 0.55 | 0.15 | 0.052 | 962 | 190 | 45 | |||
| 1200-17 | 7/32 | 0.219 | .032sq | 0.48 | 0.53 | 0.17 | 0.036 | +0.003 | 600 | 104 | 46 | |||
| 1200-19 | 1/4 | 0.250 | .040sq | 0.48 | 0.54 | 0.20 | +0.010 | 0.044 | -.000 | 915 | 150 | 47 | ||
| 1200-21 | 1/4 | 0.250 | .032sq | ±.002 | 0.48 | 0.54 | 0.20 | -0.005 | 0.036 | 723 | 125 | 47 | ||
| 1200-21R | 1/4 | 0.250 | .032dia | 0.48 | 0.54 | 0.20 | 0.036 | 700 | 125 | 48 | ||||
| 1200-22 | 17/64 | 0.266 | .040sq | 0.54 | 0.59 | 0.21 | 0.044 | 978 | 165 | 49 | ||||
| 1200-23 | 9/32 | 0.281 | +0.010 | .048dia | 0.56 | 0.61 | 0.22 | 0.052 | 1200 | 203 | 50 | |||
| 1200-25 | 5/16 | 0.313 | -0.015 | .040sq | 0.57 | 0.63 | 0.26 | 0.044 | 1160 | 209 | 51 | |||
| 1200-34 | 3/8 | 0.375 | .040sq | 0.69 | 0.74 | 0.33 | 0.044 | 1400 | 153 | 51 | ||||
| 1200-43 | 1/2 | 0.500 | .056sq | 0.87 | 0.94 | 0.44 | 0.060 | 2680 | 411 | 52 | ||||
| 1200-52 | 9/16 | 0.563 | -0.015 | .064sq | 1.03 | 1.10 | 0.50 | +0.015 | 0.068 | +0.004 | 3480 | 383 | 53A | |
| 1200-57 | 5/8 | 0.625 | .064sq | 1.12 | 1.20 | 0.56 | -0.01 | 0.068 | -.000 | 3880 | 452 | 54A | ||
