Active Member
|
[China]
Address: 2nd Floor Building D Huafeng International Robot Industrial Park, Baoan District Shenzhen
Contact name:Rita Liu
Shenzhen Sopto Technology Co., Ltd |
|
|
1000M SFP media converter, Best Fiber Optic Media Converter Price
MC131012031
1.Overview
IEEE802.3z/AB 1000Mbps Gigabit Ethernet supports two types media fornetwork connection such as 10/100/1000Base-T and 1000Base-SX/LX. The SFP media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly. With internal power unit, it providesgood stability and reliability.
3.LED Description
Thereare six LED At Front View of Gigabit SFP Media Converter
TP 100 | Lit when TP speed is 100Mbps |
TP 1000 | Lit when TP speed is 1000Mbps |
TP Act | Lit when TP connection is good. Blinks when TP data is transmitting. |
TP FDX | Lit when TP full-duplex mode is active. Off when TP half-duplex mode is active. Blinks when collision signal is present. |
FX Act | Lit when TP connection is good. Blinks when TP data is transmitting. |
PWR | Lit when +5V power is coming up. |
4.Fiber Technical Specifications
| 1000Base-SX | 1000Base-LX-10 |
Connector type | LC | LC |
Fiber type | Multi-mode | Single-mode |
Wavelength | 850nm | 1310nm |
Max Distance | 62.5µm: 224m 50µm: 550m | 10Km |
Min TX PWR | -11.0dBm | -12.0dBm |
Max TX PWR | -6.0dBm | -5.0dBm |
Sensitivity | <-18dBm | <-21dBm |
Link Budget | 7.0dBm | 9.0dBm |
| 1000Base-LX-30 | 1000Base-ZX |
Connector type | LC | LC |
Fiber type | Single-mode | Single-mode |
Wavelength | 1310nm | 1550nm |
Max Distance | 30Km | 70Km |
Min TX PWR | -8.0dBm | -5.0dBm |
Max TX PWR | 0dBm | 0dBm |
Sensitivity | <-25dBm | <-25dBm |
Link Budget | 17.0dBm | 20.0dBm |
5.Installing the Converter
1. Attach a SFP to SFP Cage on the media converter
2. Attach fiber cable from the media converter to the fiber network. The fiber connections must be matched: transmit socket toreceive socket.
3. Attach a UTP cable from the TP network deviceto the RJ45 port on the SFP Media Converter.
4. Connect the power cord to the Media Converter and check that the Power LED lights up. The TP Act and FX Act LEDs will light whenall the cable connections satisfactory.
6.Technical Specifications
The SFP Media Converter conforms to the following standards<
| Standards | UTP Cable | Fiber Cable |
| IEEE 802.3z/AB 10/100/1000Base-T 1000Base-SX/LX | Cat.5e or Cat.6 cable and upto 100m. | 1000SX:50/125,62.5/125µm multi-mode 1000LX: 9/125µm single-mode |
| Data Transfer Rate | LED Indicators | TP Flow Control |
| 2000Mbps for full-duplex at 1000Mbps speed | TP Act, Fdx, 100, 1000, Power,FX Act | NWay auto-negotiation |
| Fiber FlowControl | Power Requirement | Ambient Temperature |
| NWay at full-duplex mode | 220V(175-260V)AC,50Hz | 0~50 |
| Humidity | Dimensions Internal | External Power |
| 5% 90% | 26×70×93mm | 40×1100×140mm(H×W×D) |
:
