Roll To Roll Eco Solvent Printers , Galaxy UD 25C8AC CMYK Solvent Flex Printing Machine

Specification

4pcs / 6pcs CE4M Printhead: UD-19C6AC / 6Heads / 1920mm

UD-19C6AE / 6Heads / 1920mm

4pcs / 8pcs CE4M Printhead: UD-18C8AC / 8heads / 1820mm

UD-18C8AE / 8Heads / 1820mm

Advantages

1. Supper Excellent Drops Position Accuracy
Accurate drops position can achieve extraordinary piezoelectric process and injecting control technology
1) Single pass application
Achieve higher printing speed From extensive array printing to extensive vast printing by installing multiple heads
2) For a scan application program
The increasing of throughput can reduce scan times By increasing multiple printheads of each color

2. Compatible UV Curing And Oil Base Pigment Ink
1) Oil base pigment ink is fast dried, suitable for applying to required absorbent material
2) UV curing ink is suitable for applying to non-absorbent material, and it’s suitable for all kinds of industry application

3. Steady Injecting Water Circulation Temperature Control System And 636 Channel
1) CE4M printhead are equipped water channel and chassis of water interface. Circulation heating water create even temperature for printhead, to make steadier inject capability.

4. Ink Volume Range
1) Extraordinary technology that Multiple inject to one point create extensive half-tone and each drop range from at least 5PL to at largest 90pl.
2) Compare to common binary printhead, it’s more suitable for all kinds of industry printing which describing smooth density level to dark.

5.Higher Driving Frequency ( especially in micro drops)
Regards 1: Data transfer mode is 15KHZ or others.
Regards 2: Driving frequency 1-6 drop in CA3 is reference.
Regards 3: The above data is base on Toshiba internal testing
Result. Optimizing driving frequency can be different depend on different ink.

Power Supplier Safety

Attention: For safety of the operator and Printer, ground wire must be connected! The printer

should be installed by qualified maintenance technician.

1. Power supply: single-phase 220V AC /50HZ. Max power: 1000W, Print power: 100W

2. Using only the power type that the printer label identified. You can choose 110V AC or 220V AC power supply according to your countries or regions’ applications.

3. Connecting all equipments to a properly ground outlet to avoid the use of sockets with those in the frequent switching between on and off the device (such as: photocopiers, air-conditioning systems) in the same circuit.

4. Avoid to use of wall-board switch or autotimer controlled outlet, always turn off your printer by the power switch which is on the right side of printer.

5. Do not use damaged or broken power wire.

6. If additional power wire has to be used, make sure the sum of amperage of other device and the additional power device can not exceed the rated amperage of the power supply. Do remember the sum of amperage of other devices and the additional power wire plugged into the wall can not exceed the wall outlet’s rated amperage of power supply.

7. Keep your computer system away from electromagnetic interference source(s) such as loudspeaker or wireless telephone. Do not try to repair printer by yourself while meet problems, seeking for help from printer maintenance technicians in time.

Product Display