Water Absorbent Sponge Sole Cleaning Machine Accessories Oil Resistance

Sole Bottom Cleaning With Water Absorbent Sponge For DustFree And Dry

Product Quick Detail 

1. There is a dry state and a wet state.Soak in water until soft before use (do not soak in water above 80 °C), dry it in a ventilated place to make it hard.

2. It has strong water absorption capacity and water supply capacity, and does not drip after filling with water.

3. The PVA absorbent sponge is light, silky and absorbent.

4. Made of PV A (polyvinyl alcohol), PVA has unique strong adhesion, film flexibility, smoothness, oil resistance, solvent resistance, protective colloid, gas barrier, abrasion resistance and special treatment. Water resistance.

5. The most eco-friendly cleaning products.

6. Finished cleaning within three seconds.

Product Description

1. Since the microfiber has a small diameter, the bending rigidity is small, the fiber feels particularly soft, and has a strong cleaning function and a waterproof and breathable effect.

2. The ultra-fine fibers have many fine pores between the microfibers to form a capillary structure, and if processed into a towel-like fabric, they have high water absorption.

3. Microfiber filament is a non-polluting high-tech new textile material, which is composed of an ultra-fine microfiber produced by the organic compounding of polyester and nylon. Because it is a raw material with strong water absorption, good gas permeability, mildew resistance (antibacterial and antibacterial after special treatment).

4. Warp-knitted terry cloth made of imported looms, whose surface properties are uniform, compact, soft and high-elastic fine velvet, which has strong decontamination and water absorption properties. No damage to the surface to be wiped, no cilia falling off the common cotton fabric; easy to wash and durable.

5. For the environment to be disinfected , the width indicator lamps on both sides of the sole cleaning machine is ultraviolet light , with the cleaning area and the suction area are irradiated for a long time . (Option)

6.The total width of the sole cleaning machine is 76cm , the width of the effective cleaning area is 43cm. The cleaning length is assembled according to the customer's requirements , and multiply by 6cm . (Option)

Product Advantage

1. Good water resistance, Alkaline resistance and acid resistance. Combustible, black smoke, melted and dripped with a special smell.

2. This product contains anti-fungal agent, does not mold, is more elastic than any other sponge and is not easy to tear.

3. The product is light, silky and absorbent.

It is suitable for makeup, rags, sweat absorption during exercise, water absorption and blood suction during oral surgery.

4. The product is extremely soft and does not drip when the liquid is full.

Its "magic"-like liquid absorption rate and soft and delicate after aspiration, and its close to muscle elasticity are used in the medical field, and will gradually replace traditional products such as gauze and medical cotton.

5. It is very convenient to replace the brush without on the machine disassembly the sole cleaning machine.

6. Automatic induction control. When the personnel are close, the equipment automatically starts working and leaves the automatic stop work, which can effectively save energy, reduce mechanical loss, prolong service life, eliminate the need for special care, and reduce management costs.

Working principle

1. When a person pass through the machine , the brush rotates, and the adjacent two brushes rotate in opposite directions ; The foot is stepped on the brush pedal to achieve the purpose of cleaning the sole . Automatically changing water and automatically discharging dirt .

2. The cleaned shoes can be sucked dry when they are placed on a high-performance absorbent sponge.

3. The new generation HARDWOKR® sole cleaning machine comes standard with exclusive quality power supply. It adopts 24V human body safety contact low voltage, several sensors built in the body, multiple safety protection to prevent overflow and leakage. In the process of using, the user's safety is fully considered, and the user's worries are better solved.

Conditions of Use

1. Ambient temperature: 0-40 ℃ .

2. Supply water temperature: 0-30 ℃.

3. Water pressure: 2-6kg/cm².

4The floor must be horizontal and sturdy when installed, besides, there is no pit, no tilt. The bottom of the machine must be completely in contact with the ground, no gap.

Specifications

FAQ:

1. Are you a factory or a trader? Where is the factory?

    A: We are a production-oriented company located in Kecheng Road, Jiulongpo District, Chongqing. Welcome to visit the site.

2.  After-sales, distribution channels, is there a store maintenance?

    A: Our products are strictly controlled from order to delivery. Jiebang's maintenance service outlets are spread all over the country, covering multiple cities and having 1000+ service outlets to ensure professional after-sales service.

3.  Shipping and transportation time

    A: Shipping fee, air freight, international courier fee, transportation time can be based on the customer's specific country. From the outbound to the transportation, we will track the whole process and view it in real time. We will deliver the best service with the fastest speed.

4. When is the delivery time?

A: Massive inventory, 48-hour delivery (according to the conditions of our factory, except for holidays and peak seasons, delivery within 48 hours)

5. How to pack?

A : Package is a wooden box tailored to the product. If you need other packaging, you can communicate with customer service, and the additional cost will be calculated.

6. Is there a product certification?

A : Our company will provide CE, ISO, THUVROS and other certifications required by customers.

Packing: wood box

Skype: 86-19936133523

Contact person: Helen Won

Email: hrong0821@gmail.com / hrong0821@163.com