Apollo soldering tips DCN series

Leisto's production Apollo Seiko compatible soldering tips have good performance such as low temperature difference (plus-minus 10 degree),smooth solder wetting performance.The great base copper & precise plating technology improves the thermal conductivity and reduce the temperature recovery time.The soldering tip can make the robots get the most out of automated soldering: working stable, low faulty soldering joints.

• TM iron cartridge: 145mm length for AC100V
• TS iron cartridge: 101mm length for AC100V
• DCM iron cartridge: 145mm length for DC48V
• DCS iron cartridge: 101mm length for DC48V
• DCN iron cartridge: 101mm length for DC48V, sleeve with N2 supply

• DC48V, 101mm length
• Total Length: 101mm, Diameter: 6.4mm
• Tip width: a: 5mm, b: 4mm
• Tip thickness (c): 1mm
• Tin area, two side (d): 3mm

Advantages of Leisto Soldering Tip:

1. - made with pure oxygen-free copper
2. - long time electroplating makes the plating layer more denser, the life time is longer than other tips
3. - short lead time for standard robot tips
4. - the cost is much lower than original tips
5. - Custom made available
6. - offer sample for testing

Tip Cleaning Notes:

1. If the sponge cleaner is utilized, air-blow cleaning is normally not required.
2. Some applications require air-blow & sponge tip cleaning (depending upon tip type)
3. Standard cleaning duration is 0.5 second
4. The iron tip does not need to be extended if not required
5. The air-blow cup is not included with the standard Luna system

 If the tip is not “wetting” with solder (oxidation): 

• Remove pre-solder on tip completely.
• Remove oxidation by sand paper after cooling down the iron tip to room temperature.
• Turn on the power and apply solder on the iron tip during rising the temperature (manually).

The tip will wet with solder by the above process.

100% quality guarantee quality guarantee:

• 1:1 made according to Apollo Seiko solder tip.
• Assembled with best quality heating element and connection terminal.
• Every tip is tested by professional equipment during production and before delivery
• Free replacement if quality issue