983A Glue Dispenser
- Name: Glue Dispenser
- Brand: Dongmao
- Model: 983A
- Condition: Brand New From Factory
- Timer: (Programmable) 0.01-1S, 0.1-10S, 0.2-20S and 0.3-30S
- Manual Mode: Continuous / momentary
- Repeat Tolerance: ±0.5%
- Voltage Input: AC 220~240, 50Hz
- Internal Voltage: 24V DC
- Minimum Deposit: 0.01ml
- Air Input: 2.5 to 7 bar (35 to 100psi)
- Air Output: 0.1 to 5.5 bar (1 to 78psi)
- Size: 23.8 * 15.5 * 6cm
- Weight: 3KG
- Manual or timer operation modes
- Foot pedal controlled
- Suck-back feature ensure no dripping
- Designed for wide range of application as EFD, I&J Fisnar
- Complete with an accessory dispensing kit
- Timer mode dispensing time 0.01-99.99 seconds
- Timer mode cycle time 0.1-9.9 seconds
- Manual mode, materials could be dispensed continuously until
operator release the foot pedal
- This unit need to be connected to air compressor (1.5HP or above)
Package includ:
1 X Main Unit
1 X Foot Switch
1 X Hand Switch
1 X Dispenser Stand
3 X 30CC Liquid Barrels
3 X Steel Needle
3 X Plastic Tip
1 X Air Tube to Barrel
1 X Air Tube to Air Supply
1 X Power Cable
1 X User Manual
Application:
Apply the liquid material:
Adhesives,Damping oil,Add
Epoxy,Anaerobic,adhesive,Chemical,reagents,Flux,Copper
solder,Silicone,Viscosity,Conductive ,silicone
grease,Solidification style cover agent,Solder
resist,Ink,Paint,Solder paste,Fiber paint,Drops,Solvent
Applicable products:
Auto Electric,Package,Household appliances,Bearing,PCB,Electronic
component,Camera,Medicine,Electrical
components,Capacitors,Production
deal,Instrument,Jewelry,Relay,Quartz
Operation method:
1.Automatic operation (auto) (applicable to quantitative, time
dispensing)
The switch to the automatic auto position.
Adjusting the air pressure, the amount of glue, and select the
appropriate interval needles can control the proper flow of liquid
material.
Without the foot switch, the liquid material will be set according
to the amount of plastic and intervals automatically drops out from
the needle hole.
2.Be operated by hand (manual) (applicable to non-quantitative,
non-time dispensing)
The switch to the manual position.
Adjusting the air pressure, the amount of glue and select the
appropriate needles.
Step on the foot switch once the liquid material from the needle
hole drops out, release the foot switch to stop the glue, the glue
and the intervals for complete manual control
Feature:
1.DIP control the amount of glue and intervals, digital glue
showing at a glance.
2.Using 0.18CV constant flow solenoid control valve
3.Indicator switch
4.Town adjustable suction air filter up to 15 inches / Hg (Hg)
5.Ingenious footswitch
Main parameter:
1.Power Supply: AC 220V ± 10% / 50Hz
2.Power consumption: <12W
3.Air Source: Maximum 0.99MPa (clean dry air without lubrication)
4.Spit pressure adjustment range: 0.05MPa - 0.99MPa
5.Function modes: manual mode and 16 kinds of ways set free
6.Spit time adjustment: automatic timing spit 0.01S-99.99S /
0.001S- 9.999S groups
7.Spit time display: four LED display, can easily fine-tune the
discharge volume
8.Spit interval adjustment: 0.1-9.9S
9.Vacuum features: adjustable to 600 mm Hg negative pressure
control
10.Repeatability and spit Frequency: Accuracy: + 0.01%
Frequency:> 800 beats / min
11.The minimum discharge rate: 0.0001ml
12.Dimensions: 235mmx225mmx63mm
13.Weight: 3kg