Changzhou Hangtuo Mechanical Co., Ltd |
Verified Suppliers
|
Small Worm Gear Slewing Ring Drive For CSP Heliostat And Parabolic Solar Power System
Slewing Ring Drive Description
Our SDE series slewing drive mainly used for PV, STP, CSP solar
tracking systems, this model is dual axis for horizonal and
elevation directions. It can be used for 10 square meters of solar
panels. We are committed to researching, developing and
applying high quality, precision slewing drives, we provides
reliable horizonal single axis, dual-axis slewing bearings and
slewing drives for solar tracking systems, CSP,CPV solar trackings
etc. Our professional and high-quality products will be also
applied well as a steady solution on aerial working platform, truck
crane, timber grab, drilling rig, spray equipment, hydraulic module
vehicle,automated assembly lines, wind yaw systems,etc.
SDE Model Slewing Drive Performance Parameters
SDE Model Performance Parameters | ||||||||||||
Model | Rated Output Torque (N.m) | Tilting Torque (kN.m) | Holding Torque (kN.m) | Axial Load (kN) | Radial Load (kN) | Ratio | Efficiency | Precision (degree) | IP | Working Tep (℃) | Self-locking | Weight (kg) |
3" | 600 | 1.5 | 5.8 | 10 | 15 | 31:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 25kg |
5" | 800 | 6 | 9.2 | 16 | 27 | 37:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 34kg |
7" | 2000 | 7.5 | 13.2 | 34 | 58 | 57:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 56kg |
9" | 4300 | 16 | 27.2 | 60 | 130 | 61:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 92kg |
12" | 5800 | 25 | 41 | 77 | 190 | 78:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 160kg |
14" | 6750 | 48 | 45 | 110 | 230 | 85:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 224kg |
17" | 9460 | 67 | 54 | 142 | 390 | 102:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 320kg |
21" | 16000 | 89 | 65 | 337 | 640 | 125:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 492kg |
25" | 21450 | 112 | 89 | 476 | 950 | 150:1 | 40% | ≤0.15 | 66 | -40~+80 | Yes | 705kg |
Applications
Tower CSP system
Because there are many tower mirrors, the amount of rotary reducer
is the most in tower projects. The tower power station adopts the
rotary reducer as the driving component in the horizontal azimuth
around the world, and the pitch angle can be selected from the push
rod or the rotary reducer. Different thermal power generation EPC
manufacturers adopt different structural designs. Since the tower
power generation is equipped with many large solar reflectors on a
large area of the site, each is equipped with a tracking mechanism,
which can accurately reflect the sunlight to the receiver on the
top of a high tower. This puts forward higher requirements on the
mechanical transmission accuracy, service life, maintenance-free
and rigidity of the rotary drive device.