Hynall Intelligent Control Co. Ltd |
Verified Suppliers
|
|
RF wireless, tunable white and tri-level dimming control 12V microwave sensor
Features:
1. | Operating voltage: | 12/24V DC |
2. | Input current: | ≥50mA |
3. | Detection range | up to 12m in diameter |
4. | RF transmission distance : | max. 50m in open area |
5. | Mounting height: | 3〜6m |
6. | Operation temperature: | -20℃ ~ +70℃ |
7. | IP rating: | IP20 |
8.Two channels output 0~10V / PWM signal, achieve color temperature adjustment and tri-level dimming.
9.RF wireless cluster control, ideal for retrofit project / parking
garage / staircase / corridor applications,
easy installation, free of wiring.
Source current / Sink current: Max. 20mA; 0-10V leads can not be short-circuit.
RF Grouping ( via remote control )
Short press “Learn” button to the receiver unit to start grouping
mode, the receiver unit will beep quickly (every second
for 3min). This grouping mode will last for 3min, second short
press on it will quit the grouping mode.
Short press “Send” button to the commander unit, it will beep once
to start a 5s RF signal sending,and then beep twice to
indicate finish of it. After receiving the RF signal, the receiver
unit will beep 1s to indicate the success of grouping.
Long press “Erase” button for 5s to the sensor unit, it will long beep once, to indicate the success of erasing.
Note:
1. If you want the sensor to work as both commander and receiver ,
you need to repeat the “learn” and “send” process
again with the identification exchanged.
2. Each receiver can learn up to max. 32 commanders, late
commanders beyond 32pcs will automatically substitute earlier ones.
3. Before using the remote control for grouping, you have to
position the grouping DIP switch at OFF - OFF - OFF.