200KW On Off Grid Hybrid Solar Inverter With Mitsubishi IPM Power
Module
The 200KW on off grid hybrid solar inverter is
one of the most advanced DC to AC converter in the world. It adpots
Mitsubishi sixth generation IPM power moduel which promise high
qefficiency and stable performance. With other high quality
materials, its service life can be up to 20 years. This inverter is
a full power output, and with two starting models, it can work for
all kinds of AC loads. The pure sine waveform promise a stable AC
power output which has no damage to appliance. The inverter can
work with battery, PV arrays, Wind generator or Grid power
directly.
Advantages
- Save cost: it can work with solar panel directly, without battery
and solar charge controller, the inverter makes the whole system
more economical
- Voltage stabilizing: the inverter has high precision voltage
stablizing and filtering, when utility grid power is unstable or
poor, the inverter can give out stable voltage and high quality
pure sine waveform, the voltage transient response is less than
40ms
- 0 second seamlessly switch between DC power and grid power: when
solar power or battery power is poor, inverter will automatically
swith to grid power immediatly. The switch time is 0 seconds
- Unique anti-oscillation function: when there is no grid power
input, the inverter still can running stably and independently. It
won't happen to turn on/off repeatedly these oscillation problems
- High efficiency: if it work with solar panel direcly, with the
maximum power point tracking function, the using efficiency of
solar power/wind power can be up to 94%
- Durable&Long service life: anti-sand, resistant to moisture and
salt, suitable for harsh environment, the designing service life
more than 15 years
Features
- Two kinds of starting mode: Reduction Voltage Start and Variable
Frequency Start. Customers can set the starting mode according to
the type of the load.
- The output frequency can be set, this function is very convenient
for customer
- The output voltage can be set between +20 % to -40 % of rated
voltage. It’s a great convenience to users
- The DC input voltage range can also be set. Over-voltage point,
under-voltage point, over-voltage recovery point, under-voltage
recovery point all can be adjusted via the LCD panel.
- Convenient for increasing or reducing the quantity of batteries,
photovoltaic modules also can be used flexibly
- Pure sine waveform output. With perfect transient response
less than 40MS, little harmonic distortion, higher conversion
efficiency and stable output voltage
- LCD can display the DC input voltage, output frequency, phase
voltage, phase current, AC bypass input voltage, output power KWH,
time and date, temperature and fault code
- Using the sixth generation efficient IPM intelligent module
from Japanese Mitsubishi to ensure high efficiency and stable
performance. It with powerful protection function, such
as short circuit, over load, over temperature is more safe and
reliable. It’s service life can up to 15 years or more
- Wide input voltage can be set according to customer’s requirement.
Input voltage range can be selected from 100-500V or 200-850V
- Product have passed the European CE (EMC and LVD) certificated and
accredited by Australia CEC energy network.
Parameters
Model | YQLI-200KW |
Isolation | Low frequency transformer |
DC input | Rated voltage | 480V | 600V |
Rated input current | 417A | 334A |
AC input | AC input voltage | 220V or Customized |
Frequency | 50Hz or 60Hz |
AC output | Rated output power | 200KW (full power output) |
Output waveform | Pure sine wave |
Phase | Three phase (four wire+ground) |
Output voltage | 380VAC±3%(three phase) or Customized |
Freqency | 50Hz/60Hz±0.05Hz |
Power factor (PF) | 0.95 |
Overload ability | 150%, 10 seconds |
Efficiency | ≥93% |
Waveform distortion rate (THD) | <3%, linear load |
Dynamic response (0~100% load) | 5%, ≤30ms |
Display | LCD |
Display language | English |
Running model | Working continuously (7*24hrs) |
Electrical insulation properties | 2000VAC, 1 minute |
AC bypass function | Yes |
Solar controller build in | Optional |
Battery AC charger build in | Optional |
RS485 communication | Optional |
Protection | Protection | Input reverse polarity, under voltage, over voltage, output
over-current, short circuit, overheating and so on |
Cooling method | Fan cooling |
Short circuit protection | No automatic recovery, need to restart the machine by manual |
Others | Ambient temperature | -15~+55°C |
Humidity | 0~90%, non condensation |
Noise | ≤50dB (1 meter) |
Protection degree | IP20 (indoor) |
Altitude | ≤2500 |
Size | 1200*1500*1800mm |
Certification | CE (EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000) |
Remark: the parameters are remarked on Red color which can be customized
according to your demands,p please share details about your power
system, we will recommend right model for you.