Active Member
|
[China]
Address: Room 1009, building 3, Baolong Industrial Park, No. 4, Baotong Road, Wuzhong District, Suzhou, China ZIP: 215128
Contact name:John
Suzhou Jun Hui Import and export trade Co., Ltd. |
|
|
Solar Panel
Brief introduction
Solar panel refers to a panel designed to absorb the sun's rays as a source of energy for generating electricity or heating. Solar Photovoltaic panels constitute the solar array of a photovoltaic system that generates and supplies solar electricity in commercial and residential applications. A single solar module can produce only a limited amount of power; most installations contain many sollar panel cells.
Advantages
1. All solar module produces without any aberration or bubble.
2. Back sheet is TPT&PET, and the thickness is 0.3mm.
3. The thickness of EVA is 0.4mm,better than other company use
0.3mm or 0.35mm.We use new EVA material, not the overdue, the
overdue EVA will influence the performance and lifespan of solar
panel.
4. New aluminum with 1.00mm thickness, high hardness, good impact
resistance.
5. Tempered glass with 3.2mm has advantages of high strength,
impact resistance,good light transmittance.
6. The solar cells made in Taiwan, high efficiency, low
attenuation,the attenuation is less than 10% within 5 years and
less than 15% within 10 years.
7. The junction box has good waterproof, good anti-aging,PV wire.
The PV wire is good for anti-aging and anti-corrosion, it's better
than the normal wire.
8. Package by 7 layers thick carton, moisture proof and
anti-cracking. Two pieces in one carton, easy to delivery.
Mono Solar Panel
To produce a monocrystalline silicon cells, absolutely pure semiconduction material is necessary. Monocrystalline rods are extracted from melted silicon and then sawed into thin plates.This production process guarantees a relatively high level of efficiency silicon and makes monocrystalline panels one of the most efficient, producing smaller solar cells, and therefore smaller panels. Monocrystalline works very well in bright cool conditions.
Poly Solar Panel
Polycrystalline solar panels are also made from
sillicon.However,instead of using a single crystal of
silicon,manufacturers melt many fragments of silicon together to
form the wafers for the panel.
Polycrystalline solar panels are also referred to as
"multi-crystalline"or many-crystal sillicon.
Because there are many crystals in each cell,there is to less
freedom for the electrons to move.As a result,polycrystalline solar
panels have lower efficiency ratings than monocrystalline panels.
Mono VS.Poly solar panels :Comparison table
Monocrystalline | polycrystalline | |
Cost | More expensive | less expensive |
Efficiency | More efficient | less efficient |
Aesthetics | Solar cells are a black bue | Solar cells have a blue-ish hue |
Longevity | 25+years | 25+years |
Product Parameters
Cells type : MONO | YS-M5 | YS-M10 | YS-M20 | YS-M30 |
Peak Power (PMP) | 5W | 10W | 20W | 30W |
Tolerance | ±3% | |||
Maximum power current (IMP) | 0.57A | 0.57A | 1.14A | 1.72A |
Maximum power voltage (VMP) | 8.88V | 17.82V | 17.50V | 17.50V |
Short-circuit Current(ISC) | 0.78A | 0.63A | 1.29A | 1.94A |
Open-Circuit Voltage(VOC) | 10.30V | 21.96V | 21.60V | 21.50V |
Maximum System Voltage | 1000VDC | |||
F.F | 73% | |||
Module eff. | 18% | 18% | 18% | 18% |
All technical data at standard test condition : AM=1.5, E=1000W/m²,TC=25ºC | ||||
Cells type : Poly | YS-P5 | YS-P10 | YS-P20 | YS-P30 |
Peak Power (PMP) | 5W | 10W | 20W | 30W |
Tolerance | ±3% | |||
Maximum power current (IMP) | 0.57A | 0.57A | 1.14A | 1.75A |
Maximum power voltage (VMP) | 8.87V | 17.60V | 17.50V | 17.30V |
Short-circuit Current(ISC) | 0.78A | 0.73A | 1.29A | 2.01A |
Open-Circuit Voltage(VOC) | 10.1V | 21.20V | 21.60V | 21.30V |
Maximum System Voltage | 1000VDC | |||
F.F | 73% | |||
Module eff. | 17% | 17% | 17% | 17% |
All technical data at standard test condition : AM=1.5, E=1000W/m²,TC=25ºC | ||||
Packaging & Shipping:
1.Package: Carton Box for packaging, or Wooden Box advised for Samples to
protect in transportations.
Package designed by Clients is welcomed.
2.Shipping: DHL, FEDEX, UPS, EMS, Air Freight and By Sea.
Samples are Available for Testing and Market Test.
Services
1.Reply your inquiry in 24Hrs
2.Feedback of complaint in 24Hrs
3.OEM/ODM are accepted
4.Exclusive agents in local country are welcomed
5.Providing professional technical advice
6. All Yinsun solar products of our company have been obtained
theCE, FCC, RoHS, IEC61215, IEC61730, TUV and VDE
certificate,making sure that we can provide all of our clients the
best user friendly products!
Payment terms:
| T/T | EXW | 30% T/T in advance, paid the balance before shipment | ||
FOB | |||||
CFR(C&F) | 30% T/T in advance, paid the balance before copy of B/L | ||||
CIF | |||||
L/C | L/C amount above 50,000 usd, we can accept L/C at sight | ||||
Paypal | Amount lower than 3000usd | ||||
West Union | Depending on customer | ||||
moneygram | |||||
FAQ
FAQ of High Efficiency YINSUN Solar Panel :
1. YINSUN Solar Panel Tolerance: Positive power tolerance of 0/+3%
.
2. Quality guarantee: every product checked by QC before shipment.
10years warranty period for our solar panel. 25years linear power
warranty.
3. Reasonable Prices:we are direct manufacture, Favorable price,
Best quality.
4. OEM service: Special discount according to large qty. Tell us
your requirement.
5. Responsible after-sales service
6. Aiming to get repeat orders from 80%customer after the trial
orders
7. Making progress with you together
8. Packing: Two pieces in one safe carton, we also can accroding to
your special requirement
to add extra wood case or on wood pallet.
Mono VS.Poly solar panels : which are right for you ?
Saving money is one of the best reasons to solar , and whether you
choose mono or poly solar panels , you'll be decreasing your
electicity bills. The option you choose comes down to your personal
preferences,space constraints,and the financing option you choose.
1.Personal preferences : If the color of your solar panels is important to you. remember
that mono vs. poly solar panels tend to appear differently on your
roof. The typical monocrystalline panel will tend to have a darker
black color,while the typical polycrystalline panel will tend to
habe a bluer color.
2.Space constraints : you should prefer higher-efficiency solar panels if your PV system
size is limited by the amount of space available on your roof.
Because of this , paying the extra cost for more efficient
monocrystalline panels that can help you maximize your electricity
prodction will make more sense in these scenarios . Alternatively,
if you have a lot of roof space or are installing fround-mounted
solar, then lower-efficency polycrystalline can be a more economic
option.
3. solar financing:How you finance your system can also play a part in determining
which type of panel you choose. For example,if you choose a power
purchase agreement (PPA). You per kilowatt-hour for the electricity
produced by the system. This means that, above any type of
equipment you're being offered , your monthly payments will
determine your savings.By contrast,if you are buying your
system,paying more for high-efficiency monocrystalline panels can
result in higher returns on your solar investment.
