Home Companies Changsha Shiningyard Lighting Co., Ltd.

Factory Outlet 10 Watts Solar Porch Lights With Motion Sensor

Changsha Shiningyard Lighting Co., Ltd.
Active Member

Contact Us

[China] country

Address: No.1 Yangtang Road, Huanghua Town, Changsha County, Hunan 410100 China

Contact name:elin

Inquir Now

Changsha Shiningyard Lighting Co., Ltd.

Factory Outlet 10 Watts Solar Porch Lights With Motion Sensor

Country/Region china
City & Province changsha hunan
InquireNow

Product Details

Factory Outlet 10 Watts Solar Porch Lights With Motion Sensor

 

 

Speficiation:

Solar panelPolycrystalline 5V 3W
Rech. batt.Li-ion bat.,3.7V 4000mAh
Lamp80 LED
Lamp luminous1200LM
OperationLight sensor and PIR motion sensor
Motion detectorangle 180° and 12m distance range
Funtion1)Power ON/OFF switch
2)Delay Time 45 seconds
3)indicator light when swicth ON
Installationwall mounted

 

 

  • FEATURES

1. Solar panel: 5V 3W

2. Rechargeable battery: Lithium Battery ,3.7V, 4000mAh

3. LED: 80 pieces super bright white LEDs

4. Max.Output Lumen: 1000 lumens

5. Max.Output Power:10W

6. Material: ABSOperation Mode: PIR Motion

7. Charging Time: 12 hours full charged by sunlight

8. Sensitive times: around.200 times if battery if fully charged

 

  • Installation

Before install the unit, turn on the switch which locate at the plastic box of the 

light, and cover the motion sensor head by hand very closely to ensure the light

can turn on after some seconds. Then you can start to install the light as follow.

 

Choose a place where need lights at night and the select location should better 

situate the solar panel where there is abundant sunshine during the day.

 

Mark the hole location of the solar panel box, then set the solar panel aside.

 

Check that the marked areas are clear of obstacles such as cables and electrical

lines. Drill holes for the enclosed screws and plastic anchors.

 

Measure the space between the two hoes on the lamp and drill another hole on the

wall accordingly. Insert the dry anchor and screw.

 

Secure the lamp in place with the screws.

 

Carefully route the power code of the solar panel to the lamp and connect it with the 

cable from lamp.

 

Swivel the motion head so that it faces the area where movement will occur and

tighten the lock.

 

  • Operation

 

1.Turn on the power switch to “ON” to activate the solar security light.

2.The light will automatically turn ON during the night.

3.Test the light by walking or driving into the protected area.

4.The lamp should light up temporarily when motion is detected.

5.The light will be remaining as long as the motion moves and detects.

6.The light will turn off within 45 seconds after motion disappear.

 

 

 

 

 

 

Hot Products

Outdoor Exterior Anthracite IP65 Solar Garden Wall Light 3000K CE Approval This high quality metal ...
Solar Light Yard Decorations IP65 Rated Outdoor Up and Down Wall Light SOLAR POWERED UP AND DOWN ...
Vintage Bulb E27 3V 4W LED Solar Powered Wall Lights in Metal Made ​ Classic Gooseneck design Solar ...
Solar Lights Yard Decorations Garden Lanterns Solar Panel 5V 5W ​​ No electrical wiring required-...
Decorative Solar Garden Lights Yard Decorations Outdoor Wall Lights APPLICATION Must avoid the ...
Clear Glass Garden Solar Lights Outside Vintage LED Filament Bulb E27 Lamp Base PROFESSIONAL Metal ...