Active Member
|
[China]
Address: Solarshine industrial zone, Number 61, longxing lu north, Pingshan , Shenzhen city, China
Contact name:Simon Li
SHENZHEN SOLARSHINE RENEWABLE ENERGY TECHNOLOGY CO.,LTD. |
|
|
Consists of a vacuum tube, a heat pipe, a metal heat absorption wing and the connecting manifold. The metal heat absorption wing with selective absorption coating converts solar energy into heat energy and transfers it medium liquid inside. The vacuum between the two glass tubes works as insulation. The liquid in the heat pipe changes into vapor which rises to the condenser. When passing through the heat exchanger, the heat is absorbed and the temperature is lowed, and the vapor becomes liquid, returns to the base of the heat pipe. This transference of heat is a continuous circulation as long as the collector is heated by the sun.
Vacuum tube solar collector is a new type of solar collector with higher efficiency, simpler installation and lower cost than traditional flat plate solar collector. It is widely used in solar central hot water engineering system.
The collector consists of three parts: ground mounting bracket/all-glass vacuum collector tube/heat preservation tank.
The design of the vacuum tube solar collector is very flexible. It can be used to make the appropriate support and installation method according to the installation size of different building roofs.
| Regular models specification | |||||
| Model/Capacity | 25 | 50 | 100 | 150 | 200 |
| Vacuum tube | Φ58*1800 high efficiency collector vacuum tubes | ||||
| Vacuum tubes quantity | 25PCS | 50PCS | 100PCS | 150PCS | 200PCS |
| Mounted direction | Vertical | Horizontal | |||
| Installation size need for ground | 2X1.65 | 3.8X1.85 | 3.8X4.2 | 3.8X6.2 | 3.8X8.2 |
| Manifold inside material | SUS304 2B / 316L (Optional) | ||||
| Manifold Outer cover | Stainless steel / Colorful painted steel | ||||
| Insulation | High density polyurethane foam (Non-CFC) | ||||
| Ground stand | All stainless steel stand | ||||
| Specification of vacuum tube | |
| Structure | All-glass double-tube co-axial structure |
| Glass Material | High borosilicate glass 3.3 |
| External Pipe Diameter & Thickness | Ø=58±0.7mm&=1.6mm, |
| Internal Pipe Diameter & Thickness | Ø=47±0.7mm &=1.6mm, |
| Pipe Length | 1800mm |
| Coating Layers | Cu/SS-ALN (H)/SS-ALN (L)/ALN |
| Coating Method | Three target magnetron sputtering plation |
| Specific Absorption | as=0.93~0.96(AM1.5) |
| Emission Ratio | Σh=0.04~0.06(80°C±5°C) |
| Vacuum Tightness | P≤5.0×10-3Pa |
| Idle Sunning Property Parameters | Y= 260 ~ 300m². °C/KW |
| Solar Radiation for Obtaining a | H≤3.7 MJ/ m²(Ø47), H=2.9~3.2 MJ/ m²; |
| Preset Water Temperature | H≤4.7 MJ/ m²(Ø58), H=3.7~4.2 MJ/ m². |
| Average Heat Loss Coefficient | ULT=0.4~0.6W/ (m². °C) |
Successful Applications:
