Road Construction Equipment
Rubber tyre roller is mainly suitable for compaction of various
viscous and non-viscous materials in pavement engineering, such as
sand, gravel, stabilized soil, asphalt concrete, dry and hard
concrete, especially for final treatment of asphalt surface of
high-grade highway. It is a high-performance compaction equipment
for construction of high-grade highway, airport, municipal
engineering and industrial sites.
Sionway pneumatic tire compactor is a special asphalt compactor
typically utilized on hot mix asphalt pavement, but it's doing more
than that including rolling surface treatments like chipping and
seal, soil stabilization with modifiers such as asphalt emulsion,
calcium chloride, fly ash, etc.
Sinoway pneumatic tire rollers are with three capacities, 10 to 16
ton rubber tire roller, 18 to 26 tons pneumatic rollers, 20 to
35 ton pneumatic tire compactor. Cummins engine provides
sufficient power for altitude operation. The tire numbers are 9 or
11, which offer wider compacting width better performance.
Highlights
Famous brand water-cooled turbocharged diesel engine with advanced
performance.
The cold and hot air isolation of the engine has good heat
dissipation effect and is more suitable for high temperature
working environment.
Hydrostatic transmission, imported plunger pumps and motors ensure
constant system pressure and efficiency, two gears continuously
variable speed, smooth start without impact on the road surface,
simple and comfortable operation.
The sprinkler system uses rust-proof material, three-stage
filtration, pressure sprinkler to ensure atomization effect,
equipped with spare pumps to avoid shutdown due to waterway
failure. Equipped with large capacity water tank to prolong
operation time;
Select oil spraying device to meet the user's personalized
requirements, effectively reduce the adhesion of asphalt on tire
surface, improve the quality of work, and more adapt to
low-temperature environment;
Equipped with automatic switching dual-channel infrared night
vision surveillance system, eliminating the driver's blind area and
ensuring the safety of driving and reversing around the clock.
Standard backing buzzer, when backing up, it will give an effective
warning signal to the surrounding of the whole machine to ensure
the safety of construction.
Pneumatic hydraulic driving brake with forceps disc has large
braking moment, which can automatically compensate the wear of
working face and avoid adjustment and maintenance. Pneumatic
parking brake can automatically implement parking brake after
unexpected loss of power to ensure the safety of the whole machine
and easy operation.
The luxury cab has beautiful appearance, wide field of vision, heat
insulation and noise reduction, standard cooling and heating air
conditioning, automotive operating environment, long continuous
working without fatigue;
Front wheel articulated full-wheel floating, floating up to 200 mm,
to ensure that there is no empty pressure on the construction
pavement, to ensure the long-term quality of the pavement;
Standard tire inflation tools can inflate tires in response to
emergencies.
Engine |
Make | SC8D200 |
Type | Six-cylinder,water-cooled turbocharged,mechanical injection |
Rated power | 147kw |
Rated speed | 2000rpm |
Transmission System |
Type | Hydro-static |
Gradeability (with ballast) | 20% |
Travelling speed | |
Forward/Reverse I | 0 - 6km/h |
Forward / Reverse II | 0 - 11km/h |
Travelling pump | Piston pump |
Travelling motor | Piston motor |
Axle and Tyre |
Single tire load (F/R) | 3180kg |
Tyre number (F+R) | 5+6 |
Tyre size | 11.00-20 |
Main Technical Specification |
Operating weight with ballast | 35000Kg |
Operating weight without ballast | 30000kg |
Average ground pressure | 0.4 - 0.53MPa |
Tyre pressure | 0.25 - 0.63MPa |
Compacting width | 3065mm |
Vertical oscillation | ± 100mm |
Wheel overlap | 50mm |
Steering angle | 35° |
Oscillating angle of front tires | 4° |
Steering System |
Type | Hydraulic steering |
Working pressure | 13MPa |
Steering cylinder | ɸ90 x 50 x 260mm |
Min. steering radius | 9000mm |
Braking System |
Service brake | Hydraulic brake |
Parking brake | Mechanical apply, hydraulic release |
Service Capacities |
Hydraulic tank | 100L |
Gear box | 10L |
Fuel tank | 350L |
Engine crank case | 16L |
Water tank | 900L |
Dimensions |
Overall length | 5524mm |
Overall width | 3065mm |
Overall height | 3270mm |
Wheelbase | 4400mm |
Ground clearance | 325mm |
Electrical System |
System voltage | 24 V |