Home Companies Guangzhou Geemblue Environmental Equipment Co., Ltd.

CE Sodium Hypochlorite Generator With PLC Control For Chlorinator Plant

Contact Us

[China]

Trade Verify

Address: ROOM 801,BUILDING 2-10, CHAOTONG MANSION, NO.233 GUANGYUAN MIDDLE ROAD, BAIYUN DISTRICT, GUANGZHOU, CHINA.

Contact name:Francis

Guangzhou Geemblue Environmental Equipment Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

CE Sodium Hypochlorite Generator With PLC Control For Chlorinator Plant

Country/Region china
City & Province guangzhou guangdong
Categories Waste Management

Product Details

on site chlorine generation with PLC control for Chlorinator plant

 

 

Brief Introduction

 

It is a proven technology to convert ordinary salt (common salt) or sea water, by means of electrolysis into sodium hypochlorite (ELECTRO HYPO) using GEEMBLUE sodium hypochlorite generators (electro chlorination system). It is always applied on-site, at the point of application. No chemicals other than ordinary salt are used throughout the process.

The electrolytic cell is fed a DC current from the rectifier and electrolyzes the diluted brine into sodium hypochlorite solution. Chlorine evolves at the anode surface, while hydrogen and hydroxide evolves at the cathode surface. The secondary reaction of chlorine, sodium and the hydroxyl ion nets sodium hypochlorite (chlorine bleach) at a 0.8% solution. Below 1%, hypo is classified as a non-hazardous chemical although still a very effective disinfectant. The only by-product, hydrogen, is safety vented into the atmosphere.

 

 

Principle of sodium hypochlorite generator


Salt solution contains the several kinds of ions such as Na+, H+, when electrolysis, under a certain voltage, as a result of the movement of ions in the electrolyte solution and electrode reaction, the conductive effect occurs, then Cl-, OH- such as negative ion to the anode, and positive ions such as Na+, H+ to the cathode, and the corresponding electrode discharge occurs, thus carries on the REDOX reaction, the corresponding material production. The electrode reaction and solution reactions is
Electrode reaction:
anode: 2Cl- - 2e → Cl2;
cathode: 2H+ + 2e → H2;
Solution reaction:
2NaOH + Cl2 → NaCl + NaClO + H2O
Overall reaction as follow:
NaCl + H2O + DC →NaClO + H2↑

 

 

Product process

 

1. Influent water is passed through a water softener.

2. Using softened water to dissolve the salt in a tank to form a concentrated brine solution.

3. Diluted into 2.5%-3% after filtered (If use sea water as raw material, it will be treated before electrolysis)

3. The diluted brine is electrolyzed to a 0.8% solution of sodium hypochlorite.

4. The 0.8% hypochlorite solution flows into a storage tank.
5. The sodium hypochlorite solution will be injected into the pipe by metering pump.

6. The residual chlorine detector will monitor residual chlorine and return feedback to the PLC center.

7. According to preset standards, the PLC Center will adjust the speed of the dosing pump.

 

 

Main Features

 

1) The only raw material: salt or sea water which is safety and convenient for transportation and storage, without any volatility and toxicity.
2) Bipolar electrode connection mode, reduced the heat yield, as well greatly reduced the production of sodium hypochlorite salt consumption and power consumption
3) Salt consumption< 3.5kg / kg Cl2 (National standard 4.5); power consumption < 4kw /kg Cl2 (National standard 4.5)
4) Siemens PLC and touch screen, full automatic control

5) Cathode life >20 years; Machine life >15 years.

 

 

Project Reference
 
 
Water flow (MLD)
Capacity
Chlorine concentration (ppm)
Dosing rate (ppm)
Control
Salt consumption
Energy consumption
Huizhou water plant disinfection
400
30kg/h*3 (two duty one standby)
8000
4
PLC control / full automatic
3.5 kg/kg Cl2
4kwh/kg Cl2
Hunan waste water plant disinfection
180
15kg/h*3 (two duty one standby)
8000
3
PLC control / full automatic
3.5 kg/kg Cl2
4kwh/kg Cl2
Guizhou Water plant disinfection
40
2kg/h*3 (two duty one standby)
8000
2
PLC control / full automatic
3.5 kg/kg Cl2
4kwh/kg Cl2
Malaysia Water plant disinfection
17
3kg/h*2 (one duty one standby)
8000
4
PLC control / full automatic
3.5 kg/kg Cl2
4kwh/kg Cl2

 

Huizhou water plant disinfection

 

 

Hunan waste water plant disinfection

 

 

Guizhou Water plant disinfection

 

 

Malaysia Water plant disinfection

 

Hot Products

MMO coating Titanium anode Electrolytic cell for sodium hypochlorite production Introduction: ...
High Quality Titanium Electrode Product Description: This series of products is a ruthenium iridium ...
High Quality Customized Titanium Electrode Products for Water Treatment Product Description: This ...
Titanium Anode For Brine Sea Water Electrolysis Product Description: This series of products is a ...
High-Quality Ru-Ir-Pt Coated GR1/GR2 Titanium Electrode Products Product Description: This series of ...
High-Quality 100g/h to 5kg/h Electrolytic Cell – Working at 0~60℃ for Noble Metals Product ...