|
[China]
Trade Verify
Address: 4/F, Block C, HeHengXing Science & Technology Park, 19 MinQing Road, LongHua District, Shenzhen City, GuangDong Province, China
Contact name:Qiu
Shenzhen Socay Electronics Co., Ltd. |
|
Verified Suppliers
|
|
|
Original Factory Supply MF72-SCN2.5D-11 Resistance at 25℃ 2.5Ω±20% NTC Thermistor 95mΩ Resistance Under Load
DATASHEET: MF72-SCN2.5D-11_v2105.1.pdf
| Part Number | Resistance at 25℃ ±20% | Max. Permissible Working Current | Resistance under Load (mΩ) | Dissipation Factor | Thermal Time Constant |
| R25(Ω) | Imax(A) | (mΩ) | δ(mW/℃) | τ(Sec.) | |
| MF72-SCN2.5D-11 | 2.5 | 5 | 95 | 13 | 43 |
Features:
|
Applications:
u Switch mode power supply u Electric motor u Transformer u Adapter u Projector u Halogen lamp u LED driver circuit |
Storage Conditions of Products:
u Storage Conditions: Storage Temperature: -10℃ ~ +40℃. Relative Humidity: ≤ 75%RH. Keep away from corrosive atmosphere and sunlight. u Period of Storage: 1 year.
|
| Part Number | Type of L | Quantity (pcs/bag) |
| MF72-SCN2.5D-11 | Lshort | 1000 |
| Llong | 500 |
| Item | Test conditions / Methods | Test Result |
Tensile Strength of Terminals | Fasten body with a Load Applied to each lead 3.0Kg for 1sec. | No break out and damage |
Bending Strength of Terminals | Fixed body hand 1.0kg on one terminal bend 90 then back again oppsite. | No break out and damage |
| Solder Ability | When the Lead wire was dipped into bath 0f 235 ± 5 ℃ for 3 seconds after immersion in 25% rosin flux the solder ability ratio of lead wire surface should more than 95%. | More than 95% solder ability |
| Temp. Cycle Test | (-40℃×→+25℃×3min) × 5Cycles (-85℃×→+25℃×3min) × 5Cycles | ∣ΔR/R∣≤ ±20 % |
| Humidity Test | 45℃ 95%RH×1000 hours | ∣ΔR/R∣≤ ±20 % |
| Load Life | 6 AMP×1000 hours | ∣ΔR/R∣≤ ±20 % |
| Insulation Test | DC 700V | R≥500MΩ |
