Active Member
|
[China]
Address: 14th Building,West of Furong Industrial park,Shajing town,Bao.anDistrict,Shenzhen,Guangdong,China
Contact name:Tony
Shenzhen Jaguar Automation Equipment Co., Ltd |
|
|
INTRODUCTION:
1. Energy-saving, lead-free application, meet with environmental
protection requirement and user friendly designed
2. Automatic power system, inverter control, automatic board in-load feature.
3. Flux sprayer using transverse Japanese spray nozzle and driving by pneumatic cylinders. PLC controlled, accurate and reliable.
4. Preheating system uses four independent temperature control so as to ensure the excellent heat preservation, temperature uniformity, temperature accuracy in ±2ºC.
5. Titanium solder fingers, high strengthened double v-groove with tin resistant
6. Solder motor adopts imported high frequency conversion motor with independent control, stable performance.
7. Pre-heat passage with modularized design, environmental protection and safety, convenient for cleanup.
8. PID close loop controlled hot air pre-heaters
9. Timer startup feature for solder pot, solder melted in within 90 minutes.
10. With black box memory function, the machine can always store the SPC data, improve work efficiency.
11. Automatic finger cleaner equipped.
12. Intelligent monitoring and alarm system ensure the stable performance and operators’ safety.
Specification:
| Model No. | JAGUAR N300 |
| Number of heating zones | 3 |
| Length of heating zones | 1450mm |
| Total/running power | 18KW/5-78KW |
| Air supply | 0.5MPa |
| Preheating method | Hot air or Infrared, hot air, combination |
| Preheating power | 220V 6KW |
| Control method | PC +PLC/Touch screen/Keyboard |
| Range of temp. control | Room temperature---300ºC |
| Preheating time | About 10-15mins for setting 150ºC |
| Solder type | Lead-free / Sn-Pb |
| Solder pot capacity | 280KG |
| Solder pot temperature | 300ºC |
| Solder pot material | Cast iron enamel/Titanium alloy/316 stainless steel |
| Heating emitter power | 380V 5KW |
| Solder temp. control method | PID+SSR |
| Wave crest drive power | 1KW 220V |
| Wave crest height Control | Frequency converter |
| Warm-up time of solder | About 180mins for setting 250ºC |
| PCB width | 50-300mm |
| Component clearance | Top 120mm(option 160mm) Bottom 15mm |
| Convey speed | 0-1800mm/min |
| Convey height | 750+/-20mm |
| Convey direction | L→R (R→L optional) |
| Convey angle | 4-7 º |
| Convey width adjustment | Manual |
| UPS | Option |
| Nitrogen structure | Option |
| Flux pressure/capacity | 3-5 bar/3.5L |
| Weight | 1200KG |
| Power Requirement | 3P5W,380/220V 50Hz 63A |
| Dimensions | 3600(L)*1250(W)*1650(H) |
