New Condition Led Light Making Machine Solder Paste Mixer Power Single Phase 220v

The features of solder paste mixer

1. 0 maximum speed can reach 1000 rpm

1.1 When stirring, it is necessary to de-ice the solder paste beforehand;

1.2 do not have to open the container;

1.3 power single phase 220v:

1.4 No gas problem:

1.5 does not destroy the shape of tin powder:

1.6 fixtures are suitable for all kinds of 500g packaging solder paste cans;

1.7 mixing time can be set arbitrarily;

1.8 has manual speed control function

The solder paste mixer operating procedures and precautions

1 Operation steps

1.0 After commissioning, open the top cover of the machine and check that there

are no foreign objects inside the machine.

1.1 Turn the angle of the solder paste fixture of the machine and place the solder

paste jar to be stirred into the machine. Inside the fixture.

1.2 Please turn the solder paste can by hand to confirm that there will be no collision,

and the top cover of the machine Close and turn on the power switch.

1.3 Adjust the time setting time on the panel to the better mixing time, depending on

the solder paste label difference.

1.4 After the start switch is pressed, the running indicator lights. The machine starts

to automatically stir at high speed. The machine stops automatically until it is completed.

1.5 After the operation is completed, the operation stops, and the display shows the actual

mixing time. Determine the machine. After the operation stops, open the upper cover and

remove the solder paste can on the clamp.

The evenly mixed solder paste can be used.

1.6 To stop the machine running during operation, press the power switch key to stop and

cancel the operation.

1.7 Open the top cover of the machine during operation, the machine will automatically stop

running, and the upper cover will be covered. To continue the mixing operation, press the start switch again.

1.8 After the production quantity is completed, turn off the power switch;

2 Precautions

2.0 After the production runs, to open the top cover of the machine, you must wait until the

machine has completely stopped before opening:

2.1 The solder paste can or the weight on the two fixtures on the left and right sides, the

weight difference can not exceed 100 Gram. Otherwise, it will cause the machine to shake

when it is stirred at high speed. Please try to avoid;

The parameters of solder paste mixer

Contact information

Best Regards For You

website:http://www.etonsmt.com
Email:alison@eton-mounter.com

Whatsapp:+86 18973049918
Wechat:18973049918

Add: The 44th. Bld.,The5th.Cuigang Industrial Area,Huaide Community,Fuyong, Baoan District,Shenzhen,China
Shenzhen Eton Automation Equipment Co., Ltd.