Home Companies SMT PARTS SUPPLY LTD

Original New SMT Assembly Equipment Automatic Nozzle Cleaning Machine

Contact Us

[China]

Trade Verify

Address: 1709 west building XINXIN international Xiang Cheng District, Suzhou, Jiangsu, China

Contact name:kalinda wang

SMT PARTS SUPPLY LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Original New SMT Assembly Equipment Automatic Nozzle Cleaning Machine

Country/Region china
City & Province suzhou jiangsu
Categories General Mechanical Components Agents

Product Details

SMT Automatic Nozzle Cleaning Machine SMT Assembly Equipment

 

  • Product concept:

          Nozzle cleaning device adapted to new requirement of SMT. In the field of semiconductor industry, with the development of SMT, the minimization of components, the high density mounting and the miniaturization of base are possible. Moreover, the future development trend will be further miniaturization.
          In today's SMT industry, because the chip mount adsorption nozzle sticking with solder, flux etc. lead to frequent failures, bring great impact to the production, has become an urgent problem to be solved.

 

  • The difference between traditional cleaning methods:
Cleaning methodmodeshortcoming
Alcohol + wind gunUse soft cloth dipped in alcohol and then blow with a blower.The use of a large number of artificial, and can not clean the suction nozzle lumen, if the alcohol into the reflection board of glue, will cause the reflection plate fall off, fade.
Ultrasonic cleaning machineThis is a widely used method, low cost, high efficiency, but the drawback is obvious, many SMT manufacturers banned this approach.The suction nozzles collide with each other, causing significant black coating damage to the surface. The penetration of the cleaning solution also results in the loss of the reflecting plate. It is difficult to remove the solder, flux and so on that are stuck on the nozzle surface and the adsorption hole, and completely clean.
  • Economic performance

 

1.reduce the purchase cost of suction nozzle, suction nozzle scrap, often due to too dirty, and therefore the occurrence of related accidents. After using this machine, we can solve the problem fundamentally. The original nozzle is expensive, mostly in more than 1000 yuan, long-term calculation, economic benefit is considerable.

2.the reduction of unnecessary artificial traditional cleaning methods requires a lot of manual processing, after using the XW680, then do not need special personnel, all handed to the machine to complete.

3. reduce the rate of bad products, suction mouth is not clean, suction is not strong, it is easy to cause the components of the sliding and throwing phenomenon, resulting in the improvement of product failure rate.

4. improve SMT production efficiency, the correct cleaning, so that suction nozzle to maintain a new state of work, to avoid identification of errors, greatly improve productivity.

 

  • Product technical parameters:

1. principle: unique mechanical design of M=1/2mv2, the water can be broken, produce very fine spray, at the speed of sound (V=360m/s) to the kinetic energy of the formation of a strong spray nozzle, nozzle to be cleaned above form a continuous field, crushing and internal surface of the dirt, without any solvent use industrial pure water and compressed air.
2.cleaning scope: suction nozzle diameter of 0.033um-2.0mm
3.cleaning agent: Industrial deionized water, no pollution to the environment, no damage to the suction nozzle.
4. cleaning efficiency: at most 12 can be cleaned every time. After setting and cleaning automatically, it saves labor.
5.applicable object: all mounter models.
6.gas consumption: less than 130Nl/min
7.pure water consumption: 1 liters /10 hours
8.other supplies: air filter replacement once a year
9.volume: 680 (L), *530 (W), *460 (H)
10.weight: 45KG

 

Hot Products

SAMSUNG CP40 CP40L J2100447 Head Vacuum Blow Assy VGE07F-66-DC24L-NA Original new to sell Descriptio...
SMT YAMAHA KV8-M665J-00X KM0-M665J-001 YV100X AXIS-Y HNS Z R Flex Original New Original Used Copy ...
SMT Panasonic N510048188AA CM602 402 NPM LCG100 N510006423AA Grease 400g Description: Panasonic ...
SMT PANASONIC HT SLIDER NOZZLE SHAFT N210046732AA Original new or copy new Description: Panasonic HT ...
SMT Panasonic CM402 602 NPM N610076207AA CPK JIG KXFB043XA00 copy new Description: Panasonic CPK JIG ...
SMT KM1-M7138-00X YV100II YV100X AXIS-R BELT HEAD Original new or copy new Description: YAMAHA ...