Active Member
|
[China]
Address: Fuyong Xinhe Sanqu, 7 Xiang 12 Hao 102, Bao'an, Shenzhen, Guangdong, China
Contact name:Su Zhongqiu
Shenzhen Wanbo Hi-Tech Co., Ltd. |
|
|
Automatic Screen Printer, stencil printer, solder paste printing machine for LED tube strip light
SMT pick and place machine
Advantage
1, Arch bridge type suspending direct-connected scraper.
2, Print head with the programmable and suspending self-adjusting
stepper motor drive.
3, Four wheel positioning slide type with bilateral double sliders
ensures the moving accuracy and stability when scraper is running
back and forth.
4, Unique belt transmission system avoids being stuck or fall-off
of PCB.
5, Programmable motor controls transport speed and puts PCB in the
precise position.
6, The unit to clean is separated from CCD camera, which can
minimize the load of motor and impulse, improve the positioning
precision and speed and extend the service life.
7, With servo motor and lead screw, the direct connection UVW
platform is featured with high precision, high rigidity and compact
structure.
| Specifications | |||
Screen Frames | Min Size | 737×300mm | |
| Max Size | 1500×750mm | ||
| Thickness | 25~40mm | ||
| PCB Min Size | 80×50mm | ||
| PCB Max Size | 1200×350mm | ||
| PCB Thickness | 0.4~6mm | ||
| PCB Warpage | <1% | ||
| Transport Height | 900±40mm | ||
| Transport Direction | Left-Right;Right-Left;Left-Left;Right-Right | ||
| Transport Speed | Max 1500mm/s(Programmable) | ||
| Board Location PCB | Support System | Magnetic Pin/Up-down table adjusted /support block | |
| Clamping System | Side clamping,vacuum nozzle, Automation retractable Z pressure | ||
| Printer Head | Two independent motorised printhead | ||
| Squeegee Speed | 6~200mm/sec | ||
| Squeegee Pressure | 0~15kg | ||
| Squeegee Angel | 60°/55°/45° | ||
| Squeegee Type | Stainless steel(standard),plastic | ||
| Stencil Separation Speed | 0.1~20mm/sec (Programmable) | ||
| Cleaning System | Dry ,Wet,Vacuum (Programmable) | ||
| Table Adjustment Ranges | X:±10mm;Y:±10mm;θ:±2° | ||
| Solder Paste Inspection | 2D Inspection(Standard) | ||
| Repeate Position Accuracy | ±0.015mm | ||
| Printing Accuracy | ±0.03mm | ||
| Cycle Time | <15s(Exclude Printing & Cleaning) | ||
| Product Changeover | <5Min | ||
| Air Required | 4.5~6kg/cm2 | ||
| Power Input | AC:220±10%,50/60HZ,3KW | ||
| Control Method | PC Control | ||
| Machine Dimensions | 2200(L)×1200(W)×1500(H)mm | ||
| Machine Weight | Approx:1500kg | ||
Second, the characteristics
Scraper system
* Arch type suspension hanging straight squeegee
* Programmable floating self-adjusting stepper motor to drive print head
* Two-wheeled sliding rail type structure with double-slider to
ensure the accuracy and smoothness of the front and rear operation
* Designed for the different front and rear blade pressure
requirements and the stability of the lifting, to prevent the
solder paste from leaking and the blade has a certain elastic
clamping design, the blade pressure, lifting speed, printing speed,
printing range are software adjustable, and Providing customers
with a variety of demolding methods to adapt to different PCB
requirements, providing customers with a good printing control
platform;
* Slide type scraper system to improve running stability and extend
service life;
Full-closed blade pressure feedback device, constantly monitoring the size of the blade pressure, making the tin more full;
2. Steel mesh positioning system
Large and small steel mesh, good and wide applicability
The imported SMC cylinder is used as the pressure steel mesh cylinder.
Embedded scale, never fall off
Segmented fixed steel mesh frame
3. Image and optical path system
The X and Y axes are made of Japanese Kuroda high-grinding screw rods, driven by Japanese Panasonic motors at both ends.
Internally add polarizers to automatically and accurately capture MARK points of different shapes
Upper, lower and coaxial three-way uniform light source
Using Toshiba Industrial Camera
4. PCB transportation and positioning system
Freely select the direction of the board, free to combine
Special craft internal tooth transport belt to prevent card board
Programmable transport speed control for more precise stoppage
Adoptive side clamps and vacuum suction chambers, effectively clamping the PCB to ensure complete flat contact between the PCB and the steel mesh.
5. Cleaning system
Spray cleaning method
Dry, wet, vacuum wash any combination
Separate cleaning structure
Arc cleaning strip
Washing liquid, and steel mesh cleaning paper can be controlled
6. Platform calibration system
UVW platform structure, high precision, high rigidity, compact structure
Three-axis linkage, small size and high precision
7. Base and rack system
Solid shape
Panasonic motor plus Japanese original high-precision grinding screw
High rigidity, high stability left and right symmetrical frame structure
8. Electrical circuit system
Safe and simple circuit air circuit arrangement
The circuit air path is erected to discharge both sides and the rear of the machine for easy maintenance.
9. Operating system
Easy-to-learn and easy-to-use user-friendly interface with good human-machine dialogue
Do program files with teaching and navigation functions, prompts at each step
Chinese and English one-button switching
With operation log, fault record analysis and other functions
10. Other function options
Automatic dispensing function
Automatic scan code function
Automatic tinning function
Closed loop control
Constant temperature and humidity function
Steel mesh plugging function
Other functions can be customized according to the actual needs of customers
Factoty picture and customer site.
1. Can you do OEM?
Yes. Also can be customized according to the customer's specific
requirements.
2. If 110V is available?
Yes. 110V and 220V can be switched arbitrarily.
3. What kind of plug does your product equip with?
American or Australian or European or UK plug or other types of
plug.
