Active Member
|
[China]
Address: Fuyong Xinhe Sanqu, 7 Xiang 12 Hao 102, Bao'an, Shenzhen, Guangdong, China
Contact name:Su Zhongqiu
Shenzhen Wanbo Hi-Tech Co., Ltd. |
|
|
Used JUKI SMT Assembly Machine With A Theoretical 23300 Points Per
Hour
JUKI KE-2070 Pick And Place Machine with a theoretical 23300 points
per hour
JUKI KE-2070 equipped with 6 standard SMD heads Element height 6mm
specifications
JUKI KE-2070 Pick And Place Machine Remote technical support of
equipment
Multifunctional SMT Placement Machine 6 Heads For LED Power Driver
/ IC Chip
Shenzhen Wanbo High-tech Co., Ltd. has a JUKI senior engineer team
with rich maintenance experience, specializing in providing JUKI
series placement machine software and hardware maintenance and
troubleshooting. It mainly includes JUKI laser head, CPU
motherboard SUB-CPU board, drive board X/Y/Z/T axis driver, head
board, image control card, I/O board, JUKI servo motor, camera,
display touch screen, servo motor and other maintenance and
replacement services. The company's fees are reasonable, the
warehouse accessories are sufficient, the maintenance cycle is
short, the one-time repair success rate is high, and the Pearl
River Delta region can provide door-to-door installation,
commissioning, maintenance and maintenance.
Operation manual I
Step 2 Warm up the machine.
lf you warm up the machine before PWB production, the machine can
start PWBproduction stably.
①Select the
button
from the main screen.
② The "Warming-up" screen appears. Make the settings for the
warming-up
conditions.
Select what to be warmed up.
Select the warming-up conditions.
Enter the time duration when themachine stops, the number of
timesthe machine stops or the temperatureat which the machine
stops.
* Refer to Section 2.4 "WarmingUp" of the "Instruction ManualCD"
for details of the
"Warming-up" screen.
③ Check to see if the safety cover is closed, and press the
<START> switch of theoperation panel.
Press the <START> switch.
The axes and the conveyor start movingand the warming up operation
starts.
To finish the warming-up operation,press the <STOP> switch.
Operation panel
(When you select the <Time> (Count) button, thewarming-up
operation finishes when the specifiedtime passes or when the number
of times the
machine warms up reaches the specified value.)
WARNING
When you press the <START> switch, the machine starts
moving.To avoid risk of injury, never put your hand or head inside
the
machine
| Model name | High speed placement machine KE-2070M/L/E |
| Substrate size | M substrate (330×250mm) ○ |
| Element height | 6mm specifications ○ |
| Component size | Laser identification 0402 (imperial 01005) chip ~ 33.5mm square
element |
| Component placement speed | Optimal conditions 0.155 sec/chip (23300CPH) |
| Component placement accuracy | Laser recognition ±0.05mm |
| Component placement type | Up to 80 types (converted to 8mm belt) |
| power supply | Three-phase AC200~415V |
| Rated power | 3KVA |
| Use air pressure | 0.5±0.05Mpa |
| Air consumption | (Standard status) 345L/min |
| Device size (W×D×H) | M substrate 1,400×1,393×1,455mm |
| weight | 1530kg |
Accessories include: all kinds of original, domestic nozzles,
FEEDER, boards, lasers, solenoid valves, inductors,
cylinders, tank chains, etc.), laser maintenance, board maintenance
and so on.
