Paste Resistance SMT Assembly Machine Used JUKI 2070 LED Placement

Paste Resistance SMT Assembly Machine Used JUKI 2070 LED Placement

SMT Machine JUKI 2070 LED Pick And Place Machine Production power supply

JUKI full-automatic second-hand mounting machine KE-2070 six-head mounting machine

SMD LED or lens Pick And Place Machine Juki KE-2070 M substrate 330×250mm

Stable Performance SMT Pick And Place Machine For LED Lighting Factory Used Juki

High Speed SMT Assembly Machine / Pick And Place Machine For Lighting Factory

High Accuracy SMD JUKI KE-2070 high speed Pick and Place Machine 0.155 sec/chip

Shenzhen Wanbo High-tech Co., Ltd. has long introduced second-hand JUKI placement machines, the company specializes in SMT equipment: placement machines, plug-in machines, SMT peripheral equipment; Accessories: Feida, suction nozzle, JUKI laser head, CPU motherboard sub-CPU board, drive board X/Y/Z/T axis drive, headboard, image control card, I/O board, JUKI servo motor, camera, display touch screen, servo motor, etc.;

1.Windows XP (including the Ethernet communication function) is adopted as the OperatingSystem of this machine.
If you install on this machine any software not designed for this machine, we cannotguarantee that the machine functions properly. If you move or rename a file stored in thehard disk drive (HDD) or compress or copy a file or a folder, we cannot guarantee thatCAUTIONeither.
Should the machine not operate properly due to any operation above, replace yourSSD or HDD with a new one, and so your data may be lost

CAUTION
The Enhanced Write Filter (EWF) component is used and the drive C is used as ROM toprotect the Operating System (OS).
1. Do not store any file onto the drive C.
When you try to store a file onto the drive C used as ROM, the file storing operation isemulated with the main memory. Therefore, when you save a file onto the drive C, themain memory is used and it weighs down the system. When you repeat saving data onthe drive C, the amount of the memory becomes insufficient and the system displays anerror, so you may have to restart this machine.

2. When you have to change any information of the OS, update the drive C. See Section1.6 "Updating the Drive C" of this Instruction Manual for how to update the drive C.
Operations that require modification of the OS information are as follows:
− Version-up of KE-2070/80/80R system software and Flexline DB
− Calibration of the touch panel− Addition of a printer− Setting of the network (such as settings of the IP address and a work group)
− Addition of a user
− Changing of the Explorer settings
− Changing of the UPS utility (UPSilon 2000) settings

Accessories include: all kinds of original, domestic nozzles, FEEDER, boards, lasers, solenoid valves, inductors,

cylinders, tank chains, etc.), laser maintenance, board maintenance and so on.