Active Member
|
[China]
Address: Fuyong Xinhe Sanqu, 7 Xiang 12 Hao 102, Bao'an, Shenzhen, Guangdong, China
Contact name:Su Zhongqiu
Shenzhen Wanbo Hi-Tech Co., Ltd. |
|
|
6 Suction Nozzles SMT Assembly Machine For 1.2m PCB LED Strip
6 suction nozzles JUKI2070 SMT Assembly Machine Fast Speed For 1.2m PCB LED Strip
Used Juki KE-2070 Smd assembly machine Paste Bridge pile Convex lens on PCB
Silver gray Juki Ke-2070 SMD patch outdoor 80W power supply and Street lights
Pick And Place Machine Juki Ke-2070 Production 60W power supply Power adapter
Juki Ke-2070 Pick And Place Machine High Speed Led Pcb Production Line
SMT Machine JUKI 2070 LED Pick And Place Machine Production power supply
JUKI full-automatic second-hand mounting machine KE-2070 six-head mounting machine
Shenzhen Wanbo High-tech Co., Ltd. has a JUKI senior engineer team with rich maintenance experience, specializing in providing JUKI series placement machine software and hardware maintenance and troubleshooting. It mainly includes JUKI laser head, CPU motherboard SUB-CPU board, drive board X/Y/Z/T axis driver, head board, image control card, I/O board, JUKI servo motor, camera, display touch screen, servo motor and other maintenance and replacement services. The company's fees are reasonable, the warehouse accessories are sufficient, the maintenance cycle is short, the one-time repair success rate is high, and the Pearl River Delta region can provide door-to-door installation, commissioning, maintenance and maintenance.
Notational Conventions
A menu name is enclosed with double-quotation marks and a command
name isenclosed with square brackets ([ and ]).
When you have to select two commands sequentially, "/" is used
between these twoconsecutive commands.Example: [File]/[Open]
A proper name is enclosed with double-quotation marks.•A key is enclosed with angled brackets (< and >).Example: <ESC> and <ENTER>
A manual name is enclosed with double-quotation marks.Example: "KE-2080 Instruction Manual"
When two or more names that are related with each other are described, "/" may beused instead of "and."Example:Organization of This Manual
Chapter 1 Overview of the MachineThis chapter describes the configuration and overview of the machine.
Chapter 2 Operation ProcedureThis chapter describes the flow of operations from power-on to PWB production.
Chapter 3 Daily InspectionThis chapter describes the daily inspection together with the lists of daily inspectionitems and maintenance items.This manual is an introduction to PWB production with a KE-2070/2070C,KE-2080/2080R mounter.
Refer to the descriptions stored in the attached CD"KE-2070/KE-2080/KE-2080R Instruction Manual" for operations not described in thismanual.KE-2070 and KE-2080 → KE-2070/2080Windows 2000 and Windows XP → Windows 2000/XP
| Model name | High speed placement machine KE-2070M/L/E |
| Substrate size | M substrate (330×250mm) ○ l For substrate (410×360mm) ○ E substrate (510×460mm) ○ |
| Element height | 6mm specifications ○ 12mm specifications ○ 20mm Specifications _ 25mm Specifications _ |
| Component size | Laser identification 0402 (imperial 01005) chip ~ 33.5mm square element Image recognition 1.0×0.5mm~33.5mm square element |
| Component placement speed | Optimal conditions 0.155 sec/chip (23300CPH) IC Component 4600CPH* |
| Component placement accuracy | Laser recognition ±0.05mm Image recognition ±0.04mm |
| Component placement type | Up to 80 types (converted to 8mm belt) |
| power supply | Three-phase AC200~415V |
| Rated power | 3KVA |
| Use air pressure | 0.5±0.05Mpa |
| Air consumption | (Standard status) 345L/min |
| Device size (W×D×H) | M substrate 1,400×1,393×1,455mm L substrate 1,500×1,500×1,455mm E substrate 1,730×1,600×1,455mm |
| weight | 1530kg |
Accessories include: all kinds of original, domestic nozzles, FEEDER, boards, lasers, solenoid valves, inductors,
cylinders, tank chains, etc.), laser maintenance, board maintenance and so on.
