SMT JUKI Nozzle 506 nozzle 40001344 for KE2000/2010/2020/2030/2040 pick and place machine

SMT JUKI Nozzle KE2000/2010/2020/2030/2040/2050/2060 506 nozzle 40001344 used in pick and place machine

JUKI Smt nozzles models:
Juki KE700 Nozzle
E3501-721-0A0 JUKI NOZZLE 101 ASSY
E3502-721-0A0 JUKI NOZZLE 102 ASSY
E3503-721-0A0 JUKI NOZZLE 103 ASSY
E3504-721-0A0 JUKI NOZZLE 104 ASSY
E3505-721-0A0 JUKI NOZZLE 105 ASSY
E3506-721-0A0 JUKI NOZZLE 106 ASSY
E3551-721-0A0 JUKI NOZZLE 201 ASSY
E3552-721-0A0 JUKI NOZZLE 202 ASSY
E3553-721-0A0 JUKI NOZZLE 203 ASSY
E3554-721-0A0 JUKI NOZZLE 204 ASSY

Juki KE2010/20/30/40 Nozzle
E3608-729-0A0 JUKI NOZZLE 500 ASSY
E3600-729-0A0 JUKI NOZZLE 501 ASSY
E3601-729-0A0 JUKI NOZZLE 502 ASSY
E3602-729-0A0 JUKI NOZZLE 503 ASSY
E3603-729-0A0 JUKI NOZZLE 504 ASSY
E3604-729-0A0 JUKI NOZZLE 505 ASSY
E3605-729-0A0 JUKI NOZZLE 506 ASSY
E3606-729-0A0 JUKI NOZZLE 507 ASSY
E3607-729-0A0 JUKI NOZZLE 508 ASSY

Juki KE2050/60 Nozzle
40011046 JUKI NOZZLE 500 ASSY
40001339 JUKI NOZZLE 501 ASSY
40001340 JUKI NOZZLE 502 ASSY
40001341 JUKI NOZZLE 503 ASSY
40001342 JUKI NOZZLE 504 ASSY
40001343 JUKI NOZZLE 505 ASSY
40001344 JUKI NOZZLE 506 ASSY
40001345 JUKI NOZZLE 507 ASSY
40001346 JUKI NOZZLE 508 ASSY

Issues related to improper nozzle/feeder maintenance or use of poor quality nozzles are often the same. Here are some of the most common problems:
1. Poor pickup location on part. It will cause a loss of vacuum and result in parts shifting on the nozzle during transport.
2. Short/worn nozzles result in poor pickup and can cause the part not to be imbedded into the paste. When the part is not placed into the paste correctly there is not enough surface tension to hold the part while the PCB is moving. Parts will shift.