Shenzhen Relight Technology Co.,Ltd |
Verified Suppliers
|
|
2020 Hot sales Quartz Ultraviolet Disinfection and sterilizing UV
lamp
Working Instructions:
1. Gently touch to the the function switch once, the power
indicator lights up until the end of disinfection.
Or long press the function switch to turn off the lamp.
2. Then each touch to the the function switch, the time will switch
between 15-30-60 minutes,
the corresponding indicator light flashing;
3. 2 seconds after the disinfection time is selected, the buzzer
will ring for 1-2 seconds,
and the red indicator light will be on for a long time.
After another 15 seconds' delay, the control panel will supply
power to the disinfection lamp and start the disinfection.
4. Before the disinfection is about to be completed, the short
buzzer counts down for 10 seconds.
The control panel power off and the disinfection is finished.
5. Each touch to the function switch, whether it is light touch or
long press, will be accompanied by buzzer short sound;
6. The default setting is ,all lights off ,the time is not
selected.