Home Companies WUHAN RADARKING ELECTRONICS CORP.

Remote Reading Brass Water Meter Residential Photoelectric Direct Reading Post Paid

Contact Us

[China]

Trade Verify

Address: No.270, Huangjinkou 3rd Village, Hanyang District, Wuhan City, Hubei Province, China

Contact name:Ada Yang

WUHAN RADARKING ELECTRONICS CORP.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Remote Reading Brass Water Meter Residential Photoelectric Direct Reading Post Paid

Country/Region china
City & Province wuhan hubei
Categories Electronic Products & Components Processing

Product Details

 

 

Remote Reading Brass Water Meter Residential Photoelectric Direct Reading Post Paid

 


1. Features:
 
  • Magnetic drive, protected against external magnetic tampering;
  • Vacuum sealed register, frost resistant, keeps clear reading for long time;
  • Brass body;
  • Brass body can be painted;
  • External adjusting device,;
  • For cold water;
  • Remote transmission device can be added upon request
  • Many kinds of sensors, such as Reed Switch, Hall and Weagand can be supplied upon request Pulse output may be 1l/pulse ,10l/pulse ;
  • The meters conform to ISO4064 Standard Class B


2. Working condition:
 
  • Water temperature≤50°c
  • Water pressure≤1MPa (PN: 1.6MPa/16bar)
  • ΔP≤0.1MPa(Class B)
  • ΔP≤0.063MPa(R80/R100)


3. Accuracy:

From minimum flow-rate (qmin) inclusive, to transitional flow-rate (qt), exclusive:±5%

From transitional flow-rate (qt) inclusive, to overload flow-rate (qs), exclusive:±2%

Diameter (DN)

mm

15

20

25

flow ratio

Q3/Q1

80 ~ 100

overload flow Q 4

M3/h

3.125

5

7.875

permanent flow Q 3

M3/h

2.5

4

6.3

transitional flow Q 2

M3/h

0.04

0.064

0.126

Min flowQ 1

M3/h

0.025

0.05

0.063

Pressure loss

MPa

≤0.063

Max.pressure

MPa

≤1

Water temperature

°C

0.1--30

readings

M3

0.0001 -- 9999

Communication interface

M-Bus


4. Installation And Usage

Select the right water meter according to nominal flow rate which is less than or next to the rate through the pipe. It is not a good way for the user to buy the water meter based on the pipe size.

The place to be installed should be free from sunshine, frost, pollutant and water. During the period of frost, the inlet valve in the meter should be closed and the outlet valve and water tap should be open except for being packed for thermal insulation, thus to prevent the damage from being frozen.

Meter should be installed horizontally, and the digits on the dial is up to the face and arrow direction in the meter should be same with the flow.

The stone, sand and slight impurities in the new installed pipe should be cleared off for the sake of the meter fault.

For the purpose of metering accurately, the water tap should be higher than the meter.

Water meter should be not connected with pipe and there are live interface (e.g. pipe interface, connection screw, sealing washer etc.) between the meter and pipe. The meter should not be damaged due to the over-stress caused by pipe and its elements during installation.

Hot Products

Reliable 220V Digital Single Phase Electric Meter With Waterproof Design Descrition: Single phase ...
Single Phase Keypad Digital Electric Prepayment Electricity Meter with STS Description: Keypad ...
Anti-Tamper 220V Single Phase Electronic Meter Fully Sealed 1200imp/Kwh Watt Hour Meter ​ Descriptio...
230V Kilo Watt-hour Meter Anti-Theft LCD Display Single Phase Active Energy Meter Description: ...
LCD Display 230V , Class 1.0 GPRS Smart Wireless Single Phase Electric Energy Meter Description: ...
Anti Theft LCD Digital Kwh Meter Single Phase Fully Sealed 230 Voltage Description: Single phase ...