Address:
Floor 1, 2, No. 9, 10th Bystreet, North Delai Road, Shakou, Xiaolan Town, Zhongshan, Guangdong, China
Contact name:Jackey liu
Zhongshan Jiean Electronic Technology Co., Ltd.
433MHZ Wireless Universal Rf Remote Control Duplicator
Country/Region
china
City & Province
zhongshan guangdong
Product Details
315MHz/433MHz/868MHz Wireless Car Gate Remote Control Duplicator
for Garage Door KL180-2K/4K
Quick Details
Brand Name:
SELOCKEY
Model Number:
KL180-2K/4K
Certification:
CE
Color:
Black, Metal frame black
Place of Origin:
Guangdong, China
Material:
plastic, Metal
Code:
Rolling Code, Fixed Code, Learning Code, Copy Code Optional,
Duplicator
Button:
4 Buttons, 4
Function:
Digital LED Display, privacy, Heat Adjustment, Auto shut-off, Heat
Control, LED indicator light, Timer Function, Anti shock, Single
Service, Automatic, Single Serve, USB Rechargeable
Kelvin 4-Channel RF Wireless Remote Control Duplicator for Cars,
Garage Doors , Gates doors, Alarm systems etc. Fixed frequency (433.92mhz or 315mhz) for copying 99.99% common fixed and learning
code remote controls. Face to face copy the functions of your original remote by this
4-channel RF remote control duplicator with code learning functions and you'll always have a back up. Duplicate Your Existing Remote Controllers: 1. Vehicle central locking systems 2. Garage doors 3. Electronic gates 4. Electrical appliances 5. Car sunroofs 6. Heating systems
Easy to install and use, the 4 channel remote control system lets
you take control of your gadgets, car and home or garage. Works with the following remote control modules (please check your
existing remote control before ordering): Your remotes also should be Fixed code or Learning code. 2260, 2262, FP527, HT12D , HT12E , PT2240, S026-1 ,S026-2 ,S026-3
,S026-4, SMC918.... etc Please note this does not copy rolling code
Product Usage
1, Clear code:
Press and hold the top two buttons (lock andunlock label) at the
same time for approximately 3 seconds, then LED indicator flashesthree times, followed by a continuous fastblinking,
indicating that the remote control codesstored is deleted.
2, Programming
Place the original remote control and copy remote close together
(<10mm) Press and hold one button on your original remote and the button on
copy remote which you wish to be programmed on at the same time for approximately 3 seconds, then LED indicator flashes three
times, followed by a continuous fast blinking, indicating that the button is successfully copied. Repeat the above clone step for other buttons you wish to copy. NOTE: The best duplicating position varies depending on the
original remote control you are using, you can try different
positions until the code is successfully copied.
3, Recovery
Press and hold the left two buttons (lock and mute label) at the
same time for approximately 3 seconds, then LED indicator flashes three times, followed by a continuous fast blinking, indicating
that the original remote control codes have been restored. The alternate way to code recovery step is clear the codes and
relearn them again.