|
[China]
Trade Verify
Address: Floor 1st & 2nd, Building 3, Tanggang Taifeng Industrial Park, Dawangshan Community, Shajing Street, Bao'an District, Shenzhen
Contact name:Nikki
Skymen Technology Corporation Limited |
|
Verified Suppliers
|
|
|
Mechanical Knob Ultrasonic Cleaner Ultrasonic Surgical
Instrument Cleaning Bath
Specification:
| Ultrasonic Frequency | 40KHz |
| Material | Stainless Steel SUS304 |
| Tank Capacity | 30L |
| Timer | 1-30minutes , Mechanical timer |
| Heater | 20°C to 80°C, Mechanical Heating |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz |
| AC 220 ~ 240V, 50 / 60 Hz | |
| Ultrasonic Power | 600 W |
| Heating Power | 500 W |
| Tank Size | 500 x 300 x 200 mm ( L x W x H ) |
| Unit Size | 530 x 325 x 325 mm ( L x W x H ) |
| Package Size | 635 x 405 x 390 mm ( L x W x H ) |
| N.W. | 15.0kg |
| G.W. | 16.0kg |
Control panel:
Extra-thick 0.4inches(1.0mm) Stainless Steel 304 inner tank with silver ion oxidation cover and smooth coasted layer, it is corrosion and good stability.
Sound insulation silica gel material is soft that has the function of shock absorption, we stick it all round the inner tank, it can effectively reduce the spread of noise of ultrasonic vibration, thereby protecting hearing from harmful noise.
Plastic handle at both side for easy machine movement. more convenient and protect hands hurt.
SUS304 stainless steel basket is to decrease collision between sharp items and tank, which ensures it for long-term use; Also can be used to drip dry items, experience more comfortable
High heating power can heat water faster than others. Heating can decrease the adhesive strength of oil and wax to certain stuffs to be cleaned, make the cleaning solution much easiler to create cavitations under ultrasonic wave and strengthen cavitation so as to increase the cavitation level of cleaning solution, and then enhance the cleaning effect
Suggested Ultrasonic Cleaning Procedure
In all cases manufacturers’ instructions should be followed when
using an ultrasonic cleaning process. These are representative
steps.
Fill the ultrasonic cleaning tank with an approved medical
instrument cleaning solution such as CLN-LR012 available from
Tovatech following dilution instructions provided. Turn the cleaner
on to start the degassing process. This step removes entrained air
in new solutions that interferes with the efficiency of cavitation
and takes approximately 10 minutes.
In the meantime:
At the end of the cycle, remove the instruments from the ultrasonic
cleaning bath and thoroughly rinse them to remove all traces of the
cleaning solution. Deionized water rinses will avoid spotting. If
the instruments are not to be immediately disinfected and
sterilized be certain that they are thoroughly dried and protected.
Part reassembly can occur after sterilization.
Procedures should be in place to guide the replacement of used
ultrasonic cleaning solutions. In some instances it is recommended
that solution be drained and tanks thoroughly cleaned and dried
after each ultrasonic cleaning cycle. Most solutions available
today are biodegradable, which facilitates disposal but local
authorities should be consulted on proper practices.
The ultrasonic cleaner uses ultrasonic waves (vibration) using
water with detergents or enzymatic products to break up soil and
organic material on medical instruments/devices. These devices are
rinsed then autoclaved (sterilized). The autoclave sterilizer uses
heat, steam, and pressure to kill all pathogenic microorganisms and
their spores.
Package Includes:
1 x Digital Ultrasonic Cleaner
1 x Cleaning Basket
1 x Manual
Size:
