|
[China]
Trade Verify
Address: Floor 1st & 2nd, Building 3, Tanggang Taifeng Industrial Park, Dawangshan Community, Shajing Street, Bao'an District, Shenzhen
Contact name:Nikki
Skymen Technology Corporation Limited |
|
Verified Suppliers
|
|
|
300W Fast Remove Oil Two Cleaning Cycle Digital Firearms Ultrasonic Cleaner
1.Why Do You Need Firearms Ultrasonic Cleaner
Gun Lover Usually clean their gun once a week but mostly get trouble in cleaning. There are many hard cleaning components in a gun and it is not easy to clean by hand.
However, ultrasonic gun parts cleaner will do all cleaning job for you and you just need to wait several minutes.
It clean every parts of your gun and it keep same intensity in every direction.
2.Advantage Of Ultrasonic Firearms Cleaner.
Ultrasonic transducers mounted to the tank bottom produce high frequency sound waves which cause rapidly alternating high & low pressure conditions in the cleaning solution. Millions of microscopic bubbles form and then implode (a process called cavitation) resulting in an intense scrubbing action that removes fouling even in the smallest indentations, grooves and impossible to reach by hand areas.
Using water based detergents with rust inhibitor and heat, unburned
powder, carbon, lint, oil & dirt will be quickly removed from
the field stripped gun parts usually within 4-6 minutes of
immersion with minimal hand labor. Heated ultrasonic cleaning,
followed by rinsing and ultrasonic lubrication with supplied lube
pan and special oil, insures that the parts are moisture free and
protected. After excess lubricant is removed from the parts with
compressed air, they can be lubricated in accordance with
manufacturer's instructions or your S.O.P.
The parts are then restored to factory new level of cleanliness
which could not be achieved by the usual hand cleaning methods. The
process does not affect night sights, rubber grips, and plastic
frames or leave the parts dried out and unprotected.
4.How To Clean Your Firearms With Ultrasonic Cleaner.
(1). Field strip the gun
(2.) Swab the bore with a good defouler like Hoppes #9
(3). Insert the stainless steel basket into the ultrasonic cleaning system
(4.) Insert the polycarbonate tray into the stainless steel basket Ride The Waves Ultrasonic Gun Cleaning Equipment
(5). Add cleaning solution concentrate Cleaning Solution
(6). Turn heating unit on to 50 degrees C
(7). Insert gun parts into the ultrasonic cleaner
(8). Set the cleaning time for between 5 and 30 minutes, depending on how dirty the gun is. (Light maintenance on the lower end of the time scale, heavy cleaning on the higher end of the time scale.)
(9). Turn the ultrasonic cleaner on
(10). Check guns periodically for cleanliness
(11). When clean, turn off heat and the ultrasonic unit
(12). Swab the bore with a good defouler like Hoppes #9
(13). Always lubricate your gun after cleaning
5.Feature Of JP-060T
6.Specidication of JP-060T
| Model | JP-060T | Frequency | 40,000Hz |
| Tank capacity | 15L | Timer | 1-30 mins |
| Tank size | 330*300*150mm | Unit size | 387*325*280mm |
| Box packing | 460*410*360 mm | Function | Degasing/Draining |
| Ultrasonic power | 360W | Heating power | 300W |
| N.W. | 9.1kg | G.W. | 10.3kg |
| POWER SUPPLY | AC 100 ~ 120V, 60Hz ; AC 220 ~ 240V, 50Hz | ||
7. Other Recommendation
If tank size is not suitable for your spare parts, we have other big ultrasonic cleaner in store. And we can design and produce any special function ultrasonic cleaning machine you need.
8.Packing information and delivery
9.Skymen Advantage
We have been in this industry for 10 years and we are supplying machines to all seller all over the world.All distributor is welcome for win-win coperation.
We have passes ISO,High Tech Company,CE,RoHS,FCC, National Medical Instrument Approval.
