Active Member
|
[China]
Address: 3/F 2nd Building Minghui Industrial Zhongwuwei Niushan Dongcheng District Donggua,Guangdong 523128 China
Contact name:Kasey
Skyline Instruments Co.,LTD |
|
|
Enviromental Test Chamer Programmable Water Cooled Thermal Shock Test Chamber
Product introduction
Thermal shock test chamber is divided into three sections: the high temperature chamber, the
low temperature chamber and the testing chamber.
The color touch panel control system was made in Japan can display
Chinese / English. The big size liquid-crystal LCD has been
adopted.
High formula memory capacity may be set to 120 patterns. The
maximum cycle setting is 9999cycles. The maximum setting of each
section is 999 Hrs 59 Mins.
Provide with RS-232C communication interface device, capable of
controlling / editing/ recording in the linkage with the computer
and two set dynamic connection point and convenient application.
Both 2 zone and 3 zone shocks can be chosen.
All equipment is fully automatic, and all process are precisely
controlled with P.L.C.’S.
Of any part of the malfunctions, the machine will automatically
shuts down and a warning light switches on.
Machine can be shut down automatically in case of electrical power
instabilities.
Technical Parameter
| Internal Dimension | (W×H×D)50×50×50 cm |
| Structure | Two chambers design(the hot chamber or the cold chamber) |
| Damper device | Forced air drive damper |
| Interior material | SUS# Stainless steel plate |
| Exterior material | SUS# Stainless steel plate |
| Basket material | SUS# Stainless steel plate |
| Refrigeration | Cascade refrigeration system |
| Cooling method | Water |
| Ambient temperature | 0°~30° |
| Preheating temperature | above freezing 60.00°C~above freezing200.00°C |
| Pre-cooling temperature | subzero 10.00°~ subzero 70.00°C |
| H.T. Shocking | above freezing 60.00°C~above freezing 150.00°C |
| L.T. Shocking | subzero 10.00°C~subzero 65.00°C |
| Temperature uniformity | ±2.00°C |
Simulated load ic 5.0kg
HT IN-Zone subzero 65.00°C~above freezing 150.00°C/5min
LT IN-Zone above freezing 150.00°C subzero 65.00°C
Preheating time: 45MIN
Pre-cooling time: 75MIN
Senor: T×4
Setting range: Temperature: subzero 100.00°C~above freezing
200.00°C/TIME:OHIM~999H/CYCLE:0 ~9999
Resolution: Temperature:0.1°C
Output mode: PID and SSR(control method)
Power(K.W) 23
