Active Member
|
[China]
Address: 3/F 2nd Building Minghui Industrial Zhongwuwei Niushan Dongcheng District Donggua,Guangdong 523128 China
Contact name:Kasey
Skyline Instruments Co.,LTD |
|
|
Product information
High formula memory capacity may be set to 120 patterns. The maximum cycle setting is 9999cycles. The maximum setting of each section is 999 Hrs 59 Mins.
Provide with RS-232C communication interface device, capable of
controlling / editing/ recording in the linkage with the computer
and two set dynamic connection point and convenient application.
Both 2 zone and 3 zone shocks can be chosen.
All equipment is fully automatic, and all process are precisely
controlled with P.L.C.’S.
Of any part of the malfunctions, the machine will automatically
shuts down and a warning light switches on.
Machine can be shut down automatically in case of electrical power
instabilities.
Internal Dimension: (W×H×D)50×50×50 cm
Structure: Two chambers design(the hot chamber or the cold chamber)
Damper device: Forced air drive damper
Interior material: SUS# Stainless steel plate
Exterior material: SUS# Stainless steel plate
Basket material: SUS# Stainless steel plate
Refrigeration: Cascade refrigeration system
Preheating temperature: above freezing 60.00°C~above
freezing200.00°C
Pre-cooling temperature: subzero 10.00°~ subzero 70.00°C
H.T. Shocking: above freezing 60.00°C~above freezing 150.00°C
L.T. Shocking: subzero 10.00°C~subzero 65.00°C
HT IN-Zone subzero 65.00°C~above freezing 150.00°C/5min
LT IN-Zone above freezing 150.00°C subzero 65.00°C
| Cooling method | Water |
| Ambient temperature | 0°~30° |
| Temperature uniformity | ±2.00°C |
| Simulated load ic | 5.0kg |
| Preheating time | 45MIN |
| Pre-cooling time | 75MIN |
Thermal Shock Chambers perform tailored environmental stress screening of component and
board electronic assemblies
Thermal Shock Chambers make it possible to automatically and
repeatedly transfer a test item from a hot environment to a cold
environment or from a cold environment to a hot environment. This
process is defined as true thermal shock and it is different from
thermal cycling, where the specimen is introduced into the chamber
and the chamber temperature is then cycled.
2-Zone/3-Zone design available
With hot/cold transfer system
LCD touch screen controller
Program up to 100 patterns with maximum 9999 cycles
With RS-232C communication interface
Meet Mil-Std standard
