|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60335-2 Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus
Standards For Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus:
The Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus conforms to the standard requirements of IEC 60335-2-3: clause 22.101, IEC60335-2-3: clause 22.105, IEC60335-2-15: clause 22.103, IEC60335-2-14: clause 22.103 and etc.
Application For Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus:
The appliance coupler of cordless appliances shall be constructed to withstand the stresses occurring during normal use, which is verified through insertion and withdrawn testing.
Technical Parameter For Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus:
| Input power supply | AC220V±10%/50Hz, 6KW |
| Test station | Single (multiple stations can be customized) |
| Control method | PLC intelligent integrated control, 7-inch humanized touch screen operation |
| Drive mode | Servo motor drive |
| Sample clamping method | Mechanical clamping, the position of clamping point is adjustable; default with clamping fixture for cordless kettles, the clamping fixtures for cordless iron, cordless blenders and other cordless appliances should customized. |
| Stand & withdrawn stroke | 0-100 mm, can be preset on touch screen |
| Test times | 0-999999 times, can be preset |
| Conduction times | 0-999999 times, can be displayed on the touch screen |
| Load power supply | Built-in voltage 0-250V,current 0-15A adjustable, without built-in voltage and current can be optional |
| Judgment | According to whether the current is conducting or not |
| Test contents | Cordless electric iron stand and withdrawn test (with/without load power supply); cordless kettle / cordless coffee maker stand and withdrawn test (with/without load power supply); cordless blender stand and withdrawn test (with/without load power supply) |
Product overview For Cordless Kettle Irons Blenders Stand and Withdrawn Endurance Test Apparatus:
The apparatus is used to test the connection contacts of cordless
electric irons, cordless kettles, cordless coffee pots, and
cordless stirrers for household and similar purposes. The structure
should ensure that any electrical or mechanical failures in normal
use will not cause danger. Verify by plugging test.
Short-circuit the two conductive pins of the cordless electric
iron, cordless kettle, cordless coffee maker, and cordless blender.
The external load provides 1.1 times the rated current under the
rated voltage, and then the motor drives the lifting mechanism to
perform a certain number of plug life tests on the base at a rate
of 10 times/min. The sample shall be subjected to a certain number
of plug-in tests without power on. The device can be connected with
an external load or an optional built-in load. The number of tests
can be preset (up to 999999 times), and the number of tests and the
number of conductions will be automatically recorded during
operation. When the preset number is reached, the device will
automatically stop.
