|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 60335-1 Household Appliances Supply Cord Anchorage Pull Force And Torque Test Machine
Standards & Clauses:
IEC60335-1:2016 “Household and similar electrical
appliances-Safety-Part1:General requirements” clause 25.15
IEC60884-1:2013 “Plugs and socket-outlets for household and similar
purposes- Part1:General requirements” clause 23.2
IEC60745-1:2006 “Safety of hand-held motor operated electric tools
Part1:General requirements” clause 24.14
IEC60598-1:2014 “Luminaries-Part1:General requirements and tests”
clause 5.2.10.3
IEC60065:2005 “Audio, video and similar electronic apparatus-Safety
requirements” clause 16.5
Samples and Restrictions:
Plugs for connecting flexible cables, fixed or mobile sockets;
hand-held power tools; household appliances with flexible cord
anchorage (eg induction cookers, washing machines); lamps with
cables and wires; audio and video and related signal electronic
devices with flexible cords (such as projectors)
Application:
The cord anchorage shall relieve conductors from strain, including
twisting, at the terminals and protect the insulation of the
conductors from abrasion. This testing appliance applies pull force
and torque tests for cord anchorage, to verify the reliability of
the cord anchorage.
Test Principle:
The eccentric wheel is driven by a motor, to make the pull weight
pulled for 1s; the torque is applied to the sample by the
electromagnet releases the torque weight, at the same time, the
direction of the force applied and the axis of the sample form a
torque arm through the torque wheel, so as to achieve torque test.
The pull weights and torque weights can be customized to meet
different requirements in different standards.
Structure:
The equipment adopts motor cam ejector mechanism, the pull fixture
is combined with the torque fixture, and matched by the bearing in
the middle to reduce the friction during the torque test. The
Z-shaped structure enables the fixture to clamp the appliance’s
power cord which is 150mm above the bottom surface. It can test the
firmness of the power cord anchorage of large household appliances,
such as refrigerators and washing machines
Equipment dimensions: about: (W*D*H)800 × 400 × 1200 (mm) Equipment
weight: 110kg
Use Environment:
Power supply: AC220V±10%/50-60Hz,power 0.3KW or match client's
local power supply
(ca n be customized according to customer’s requirements)
Technical Parameters:
| Test Station | Single |
| Control Method | Buttons |
| Drive Method | Motor and electromagnet drive |
| Clamping Method for Specimen | Mechanical clamping, the height of clamping point is adjustable through adjusting screw rod |
| Pull Weight | 10N * 1 piece, 20N * 3 pieces, 30N * 2 pieces (Can achieve 30N, 40N, 60N, 80N, 100N, 120N pull force) |
| Torque Weight | 4N* 1 piece , 5N* 1 piece , 7.5N* 1 piece , 12.5N* 1 piece , 17.5N* 1 piece , 21.25N* 1 piece,torque arm is 20mm (can achieve 0.08N.m, 0.1 N.m, 0.15N.m, 0.25 N.m, 0.35 N.m, 0.425 N.m torque) |
| Pull Cycles | 0~999999 can be preset, default of 25 cycles |
| Pull Frequency | 1 cycle / s |
| Torque Time | 0.1S～99 h 59 m 59s |
| Test Contents | Pull and torque testing: make a mark on the cord where is 20mm to the anchorage, then apply the pull force at a rate of 1 time/second, after finishing pull testing, apply the torque for 1 min. The displacement of the mark position on the cord should not exceed 2 mm after testing. |
