|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 62196-1 EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment
Product Information For EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment:
IEC62196-1:2014 "Plug,socket-outlets,vehicle couplers and vehicle inlets–Conductive charging of electric vehicle-Part1:Charging of electric vehicles up to 250A a.c and 400A d.c".
Samples and Restrictions: New energy charging vehicle plug, locking device between vehicle sockets and plug socket connector.
Test Purpose: It is used to test the insertion force and pull-out force of the new energy charging vehicle plug, the locking device between the vehicle socket and the plug and socket connector.
Test Principle: It adopts servo motor drive, PLC intelligent control, precise force value sensor to detect real-time force value, can set the peak value of force value, automatically stop when the set value is reached, and has a time curve of force value.
Structure For EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment:
The overall 3-station structure of the equipment, each station includes an independent servo motor, a precision sliding table, a precision force sensor and a fixture, and the control is accurate.
Power supply: AC220V±10%/50Hz, power 2KW
Dimensions: about W1000*D850*H1550mm, weight: about 160kg
Technical Parameters For EV Charging Plug And Socket Withdrawal Insertion Force Test Equipment:
| Test station | 3 stations, independent |
| Electrical control method | PLC intelligent integrated control, color man-machine touch interface operation (optional computer operation) |
| Drive mode | Servo motor drive |
| Test force value | 10~1000N, other ranges can be customized |
| Load accuracy | ±0.5% |
| Minimum load display | 0.01N |
| Displacement minimum display | 0.01mm |
| Insertion direction | Vertical |
| Test speed | 0.01~100mm/min |
| Test floor | Thickened load-bearing steel plate |
| Lifting device | Precision slide |
| Specimen Holder | One special fixture for charging gun interface, other styles need to be customized |
| Protect | Over-strength alarm, leakage protection |
