|
[China]
Trade Verify
Address: No.755, Xianyuehuan Rd, Tianyuan District, Zhuzhou, Hunan Province
Contact name:Shirley
Zhuzhou Ruideer Metallurgy Equipment Manufacturing Co.,Ltd |
|
Verified Suppliers
|
|
|
MIM Sintering Furnace For SUS Material Heat Treatment With Oxalic Acid Debinding
General equipment requirements:
Main application in MIM injection molding stainless steel materials, hard composite materials, ceramic materials, wear-resistant materials, degreasing, vacuum sintering, partial pressure sintering (static, dynamic), vacuum cooling, rapid cooling and other processes.
| Furnace Type | RDE-446-0M | RDE-448-0M | RDE-4412-0M | RDE-4415-0M |
| Usable Space (W*H*L) | 400*400*600mm | 400*400*800mm | 400*400*1200mm | 400*400*1500mm |
| Max.Charge Load | 50kg | 150kg | 300kg | 500kg |
| Power Rating | 200KVA | 260KVA | 300KVA | 320KVA |
| Cooling time | ≤3h | ≤3h | ≤6h | ≤6h |
Empty furnace, cooling from sintering temperature 1450℃ to 100℃. (water temperature≤26℃, water pressure 2-3bar) | ||||
| Max. Working Temp | 1580℃ | |||
| Heating Zone | 2 Zones | |||
| Temperature Measurement | W-Re5/26 Thermocouple | |||
| Max Vacuum Degree | 1Pa (under cold, empty, dry furnace) | |||
| Leakage Rate | 3Pa/h (Average value under cold, empty, dry furnace) | |||
| Wax Collection | ≥98%(Argon gas negative dewaxing, 3-time average value) | |||
| Input gas | N2, Ar, H2 | |||
| Functions | Automatic Positive Pressure, Negative Pressure Leak Detection Ar Negative Pressure Dewaxing/H2 Micro Positive Pressure Dewaxing Vacuum Sintering Partial Pressure Sintering (Static, Dynamic) Rapid Cooling Fully-automatic control & Safety interlock& Breakpoint continuing heating & Wireless remote control& Self-diagnosis | |||
After sales:
1.Installation, Commissioning and Acceptance
We do installation, commissioning and acceptance in buyer's plant.
The equipment shipped to the buyer, both buyer and seller shall check the equipment and all components according to the packing list, including equipment accessories, spare parts and special tools, attached manual and technical documents, etc. It can be installed after the acceptance check of equipment.
After installation and debugging, the equipment shall be accepted
according to the technical contract.
2.Training
When taking-over the furnace to the customer, we will give a staff
training to customer. The operating personnel of the customer
should join to commission, test the furnace, when installing at
customer’s company.
3. Warranty period
The warranty period of the equipment is 12 months, which starts from the date of installation and debugging of the supplier. Equipment failure happens, after-sales service personnel shall give solutions within 2 hours, after receiving the buyer's notification . If it is need to go to the site for treatment , operators dispatched by seller should arrive at the site within 48 hours after go aboard. In case of emergency,operators should arrive at the site within 48 hours after go aboard, and continue to make repairs until the fault is removed and the equipment returns to normal.
