1mm 1.5mm 2mm Thickness Porous Sintered Stainless Steel Sheet
1. Porous sintered Stainless steel filter material
a. Introduction: stainless steel powder sintered filter material
(including tube and plate) is 316L powder as raw material, through
screening, molding, sintering and become a microfiltration element.
According to the requirements of users, we can produce various
shapes, structures, different granularity, porosity of porous
elements, such as: cover, cap, sheet, tube, bar filter element.
Sintered stainless steel powder filter material is a new filter
material with wide development prospect.
b.Details:
Stainless steel powder sintered filter material (including tube and
plate) is 316L powder as raw material, through screening, molding,
sintering and become a microfiltration element. High filtration
precision, good air permeability, high mechanical strength, high
material utilization rate, suitable for higher working temperature
and heat shock. Widely used in pharmaceutical industry, water
treatment industry, food industry, biological engineering, chemical
industry, petrochemical, metallurgical industry and gas
purification field. As a result, stainless steel powder sintered
filter material with its high-tech material composition and special
molding process, so that it has a unique excellent performance, is
a new type of filter material with broad development prospects.
2.The main performance
2.1. High temperature resistance, normal use below 500 degrees
Celsius.2.2 High filtration accuracy, pore stability, can effectively
remove suspended solids and particles, excellent filtration
accuracy, good purification effect.
2.3. Good air permeability, small pressure loss. High porosity,
uniform pore diameter, small initial resistance, easy back blowing,
online regeneration, easy cleaning, strong regeneration ability,
long service life.
2.4. High mechanical strength, good rigidity, good plasticity,
without external skeleton support protection, simple installation
and use, easy maintenance, good assembly, welding, bonding and
mechanical processing.
2.5. Pore uniformity, especially suitable for fluid distribution,
homogenization treatment and other homogeneity requirements of the
occasion.
2.6. Filtration precision: 1~65μm.
2.7No particles fall off, do not make the original solution form
secondary pollution.
2.8. Good mechanical properties, low pressure difference, large
flow, pressure filter can be pumped filter, simple operation.
2.9. Good corrosion resistance, can be used stably in nitric acid,
sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5%
hydrochloric acid, molten sodium, liquid hydrogen, liquid nitrogen,
hydrogen sulfide, acetylene, water vapor, hydrogen, carbon dioxide
gas and other environments. 10. Good molding process, the overall
non-welding length can reach 1200 mm. The stainless steel powder
products are formed in one time, without cutting, with high
utilization rate of raw materials and maximum material saving,
especially suitable for the components with large batch and complex
structure.
2. Specification of titanium sintered porous materials
3. Physical properties of porous titanium materials
Material | Filter Rating | Porosity | Penetrability | Working pressure | Operating temperature | Shape | specific surface area |
Pure Titanium powder | 5um-80um | 25-45% | 3-800M³/M²hKPa | 2.5MPa | 300℃ | Round disc,sheet,tube,round bar,cap | 10-40cm²/cm³ |
4. Company view