Home Companies Sino Supply Solutions co.,ltd

Mini UV Coater

Sino Supply Solutions co.,ltd

Mini UV Coater

Country/Region China

Product Details


Usage
  A ideal smart one for photo studio, for A3 size presswork uv coating on paper surface. I unit mini uv coater can match with around 10units EPSON 1390 or 15units R270 inkjet printer.
  Working principle
  Coating special liquid oil on paper surface through rotating the rubber roller smearing with the liquid oil, and then with UV lighting scanning to and fro on liquid oil coating paper so to curing the liquid oil on the paper surface, and finally deliver the paper through outlet via the conveyor belt. 
 Why choose the UV coating method on surface treatment for presswork?
1.Trimming free compare with cold and thermal film laminating.
2.Cold film laminating apt to shrink,uv coating avoid the shortage.
3.Hot film laminating on not warterproof photopaper apt to peel off and poor anti-fade,uv coating avoid the shortage.  
4.Lowest cost compare with cold and thermal film laminating. 1kg fluid oil at less than USD8 cost can coating 200 to 300 square meter.
5.Easy operation.
Why choose our Mini UV Coater?
   Saving cost. Which work under 400watt electrictiy and 220voltage, and large UV coater work under 3000 vatt in average and 380voltage. So in less than half year, the saving electricity cost can reward the Mini UV coater itself’s investment, that also tell us the cost on the Mini UV coater with supprise lower price.
  Specification
Item
A3 Mini UV Coater
Presswork size
A3 (297×420mm)
Presswork thickness
80-350gram
Coating speed
70cm/min;0.21sq.m/min at 300mm width.
Fluid oil consumption
10ml/sq meter
Voltage and power
220V 300W-450W
Machine dimension
60cm(L)×55cm(D)×25.8cm(H)
Total control button
1.main power switch 2. Heating switch 3.a power cable socket
Constructure
A Lquid coating part
1.Three Rubber Roller
Two ones up and one down, the diameter around 27mm.which is the most key part for coating liquid oil finely on paper surface. Hightlight, there are groove on two sides of down-roller for interdicting flow liquid extend to middle.
2.Rectangle tank
 Filling liquid oil and collect redundant liquid oil.
3.Squirm pump
 Take out the liquid oil continously on the middle of two the up-roller, which start work when main power switch on.
B. UV lighting curing part
 1.Smart lighting cover
 2.Moving device for UV lamp for to and for lighting and curing liquid oil.
 3.UV lamp around only dozens watt, which is no harm on operator.
C.Chain driving
  Highlight, our Mini UV Coater did not adopt Teflon gridding conveyor belt, which adopt chain driving with 5 chains independent of each other and the space between chains is 50 to 55mm, and through rotating chains to putout press work. Which structure ensure stability operation, and shortage is not available for less 5inch size photo.

Hot Products

Specification: Item SZK180 ZK 150-A 3ZK-220 Max. deepth drilling holes 50mm 50mm 50mm Max. space ...
Features It is used for the lamination pre-glued film and paper. SAFM-1100 fully automatic laminator ...
Feature: 1. Can bind up to 20books per minute 2. Setting are easily done with the intuitive touch ...
Item CK-600A(Add heavy model) Max. working length 600mm Max. Running distance 20mm Max. Punching ...
Usage A ideal smart one for photo studio, for A3 size presswork uv coating on paper surface. I unit ...
Feature This machine adopts rocking-turn pressing paper and uses lever-cutting to make cutting ...