SINO SDS6-3V Digital Readout DRO 3 Axis 1um Glass Linear Scale Meter Lathe Machine

SINO SDS6-3V Grey Digital Readout DRO 3 Axis 1um Glass Linear Scale Meter Lathe Milling Machine

A high-performance universal display console with milling, turning, and grinding capabilities is available with the SDS6-3V.
The SDS6 Digital Readout, which uses the most recent 16-bit SCM technology, may replace all types of basic and unique functions of the SDS2 Series, an all-purpose DRO.
The control system is simpler and more streamlined, and measuring speed has increased.40 non-linear correction points can be provided by each axis.

Improved Sino Digital Readout DRO Functions

Expand the calculator function: Not only should the calculator function be added to the DRO programs for the EDM, lathe, and milling machines, but also users should be given the option to choose the number of digits to be placed behind the radix point, such as 3, 4, or 5.

Non-linear error compensation: To increase machining precision, the system contains a maximum of 40 sections of non-linear error compensation.

3. The number of decimal digits in inch display mode can be selected.

     There are two options for the number of decimal digits: four or five. The demand for lengthy scales can be met with four digits, and the condition for high precision can be met with five digits. Please refer to the manual for further information on the differences.

Specifications :

Supply Voltage range: AC 80V~260V; 50~60Hz,US Plug available

Power consumption: 15VA

Operating temperature: 0~45 degrees centigrade

Storage temperature: -30~70 degrees centigrade

Readout allowable input signal: TTL/RS422 square wave

Allowable input signal frequency: Less than 5MHz

Display resolution: 5µm/1µm/0.5µm/0.1µm

Min resolution of digital display angle : 0.0001/pulse

Product image /photos:

The rack in the picture is optioned, not standard product.