BTW Reaming Shells PCD Strengthened Type
Description:
Diamond reaming shell widely used for mineral exploration,
geological exploration, water and electricity, traffic
construction, building, soil investigation, hydro-geological
exploration etc.
Reaming shells are designed to be placed behind the core bit to
ensure hole diameter is maintained and to assist core barrel
stabilization. This ensures that when a new core bit is inserted
into a continuing bore hole there is a good chance of reaching
bottom of bore hole without reaming.
Reaming shells are produced with diamond panel pads using specially
chosen diamonds, although reaming shells generally last 3 - 4 times
longer than core bits they should be retired as soon as they wear
under gauge otherwise it could result in an undersize bore hole
diameter which can mean reaming later.
Reaming shell is set with natural or synthetic diamond, and it is
used to couple the drill bit with the core barrel. Its main
function is to ream the hole to the correct constant specific
diameter which ensures adequate clearance for the core barrel and
sufficient clearance for the new bit which replaces an old one. It
also acts as a stabilizer for drill bit.
We can manufacture all kinds of diamond bits and reaming shells
according to customer's special requirement, reaming shell can
penetrate a broad range of formations from the sofest to the
hardest rocks.
Specifications:
ITEM | DIAMOND BIT | REAMING SHELL |
"Q" Series Wireline | Size | Bit-set OD | Bit-set ID |
mm | inch | mm | inch | mm | inch |
AQ | 47.60 | 1.88 | 26.97 | 1.06 | 48.00 | 1.89 |
BQ | 59.50 | 2.35 | 36.40 | 1.43 | 59.90 | 2.36 |
NQ | 75.30 | 2.97 | 47.60 | 1.88 | 75.70 | 2.98 |
HQ | 95.58 | 3.77 | 63.50 | 2.50 | 96.00 | 3.78 |
PQ | 122.00 | 4.80 | 84.96 | 3.35 | 122.60 | 4.83 |
Swedish Metric T2 Series | 36 | 36.0 | 1.417 | 22.0 | 0.866 | 36.3 | 1.429 |
46 | 46.0 | 1.811 | 32.0 | 1.260 | 46.3 | 1.823 |
56 | 56.0 | 2.205 | 42.0 | 1.654 | 56.3 | 2.217 |
66 | 66.0 | 2.598 | 52.0 | 2.047 | 66.3 | 2.610 |
76 | 76.0 | 2.992 | 62.0 | 2.441 | 76.3 | 3.004 |
86 | 86.0 | 3.386 | 72.0 | 2.835 | 86.3 | 3.398 |
101 | 101.0 | 3.976 | 84.0 | 3.307 | 101.3 | 3.988 |
Swedish T Series | TAW | 47.6 | 1.875 | 23.2 | 1.31 | 48.0 | 1.89 |
TBW | 59.5 | 2.345 | 44.9 | 1.77 | 59.9 | 2.36 |
TNW | 75.3 | 2.965 | 60.5 | 2.38 | 75.7 | 2.98 |
Other specifications and sizes are possible on request.