Inner size(mm) 600×500×750
800×800×1000
1000×1000×1200 1000×1200×1500
Outter size(mm) 1650×900×1750
1850×1200×1950 2050×1400×2150
2050×1600×2450
Heating power kw
9
15
22
28
Circulating fan kw
1.1
2.2
3.0
4.0
Supplementary fan kw 0.06
0.18
0.18
0.25
Moisture fan kw
0.18
0.25
0.37
0.75
Temperature Range ℃
Room temperature～300
Clean rating
Class 100
Circulation fan flow m3/h 2540
2700
2900
3200
Supplementary fan flow m3/h 300
408
408
408
Features:
1. motorized door using a pneumatic hoist system security and
stability;
2. motorized door using advanced vacuum sealing method, to
ensure a good seal doors, simple and practical, effectively avoid
contamination of sterilized items;
3. this series of products into the wind, exhaust system, and
the body side chambers are equipped with high-temperature H13
levels high efficiency filter, filtration efficiency of 99.99%, to
ensure the chamber reaches one hundred;
4. the cavity main filter uses an innovative modular sealing
process, improve product efficiency at the same time, making it
easier to disassemble maintenance;
5. laminar flow inside the cavity plate using a unique pore
size distribution is controlled horizontal laminar flow air,
effectively improve the thermal efficiency and temperature
uniformity;
6. the device uses an advanced automatic control system,
automatic temperature control, automatic maintain lumen positive;
7. independent over-temperature protection system,
effectively guarantee the safety equipment;
8. this product is reserved for multifunction dust particles
can be carried out to verify the interface verification test and
temperature distribution testing;
9. the chamber has a main filter DOP validation port;
10. various cooling methods, improve work efficiency.
Structural features:
1. all parts and materials may contact the interior of the
cavity are made of 316L stainless steel material;
2. the outer surface using 304-2B stainless steel, with a
new production process, in line with the GMP requirements and make
the appearance more simple and beautiful;
3. the unique thermal methods to ensure product surface
temperature ≤ room temperature + 15 ℃ z;
4. unique sealed inner chamber welding, arc transition
corners body cavity structure, no dead easy to clean.
Technical parameters:
